SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Maxtor
300 GB desktop hard drive with 7200 RPM spindle, 16 MB cache and SATA 3.0 Gb/s interface
The Maxtor MaXLine III 7V300F0 is a 300GB desktop internal hard drive built for systems that need a 3.5-inch SATA 3.0Gb/s storage device. It ships as a bare drive in new condition and suits workstations or servers requiring rotational media.
At 300GB the drive holds operating systems, applications and moderate data sets while the 7200 RPM spindle and 16MB cache keep average seek time at 9ms and latency at 4.17ms. Native command queuing doubles random read performance over the prior MaXLine generation, yet the fixed capacity means larger media libraries or backup sets will exceed available space.
The SATA 3.0Gb/s interface connects directly to standard motherboard ports without extra adapters, and the 3.5-inch form factor fits ordinary drive bays. Rotational vibration tolerance of 12.5 rad/sec helps reliability in multi-drive chassis, while RoHS compliance meets current material restrictions. Builders needing higher capacities or solid-state speeds must look beyond this model.
| Brand | Maxtor |
|---|---|
| Series | MaXLine III |
| Model | 7V300F0 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 300GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing for 2X improved random read performance over previous generation MaXLine 12.5 rad/sec rotational vibration RoHS compliant |
| Form Factor | 3.5" |
| Szállítási súly | 0.69 kg |
| Csomagméret | 203 × 152 × 51 mm |
Yes, the SATA 3.0Gb/s interface is backward compatible with SATA 1.5Gb/s ports. The drive will operate at the slower 1.5Gb/s speed but the 7200 RPM spindle and 16MB cache still provide strong performance for a desktop system.
Check the drive model 7V300F0 in BIOS or UEFI; it should report 300GB capacity and SATA 3.0Gb/s link speed. Tools like CrystalDiskInfo will confirm 7200 RPM rotation rate and 16MB buffer size.
The box contains only the bare 3.5" hard drive unit. You must supply your own SATA data cable, SATA power connector from the PSU, and 3.5" mounting screws or drive tray for your case.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?