Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Small green circuit board with tiny camera module and two ribbon cables attached

MCDODO

MCDODO Arducam IMX219 8MP Raspberry Pi Camera V2

SKU CH-T6KW-8WNV3

An 8 MP IMX219 camera board for Raspberry Pi, delivering 1080p at 47 fps with included 15 cm cables for standard and Zero models

  • TypeSingle Board Computers
  • 8 megapixel IMX219 sensor captures 3280 × 2464 resolution stills
  • 1080p video at 47 fps for smooth recording
  • 1640 × 1232 at 41 fps balances detail and speed
  • 640 × 480 at 206 fps enables high-speed capture
  • Includes 15 cm FFC cable for Pi A/B and 15 cm FPC cable for Pi Zero & W

What the product is

The MCDODO Arducam IMX219 is an 8 megapixel camera module built for Raspberry Pi boards. It ships with a 15 cm FFC cable for full-size models and a 15 cm FPC cable for the Pi Zero and Zero W. The sensor captures stills at 3280 × 2464 and video at 1080p 47 fps, 1640 × 1232 at 41 fps or 640 × 480 at 206 fps. Power requirement is 5 V at 1.8 A typical.

Who this suits

Makers adding vision to OctoPrint 3D-printer monitoring, home-security rigs, dash-cams or machine-vision prototypes will find the resolution and frame-rate options useful. Builders who need more than 8 megapixels, a global-shutter sensor or a different lens mount should look at something else. Projects that cannot supply 5 V at 1.8 A must choose a lower-power module.

Deciding specification

The IMX219 sensor delivers a maximum resolution of 3280 × 2464 pixels at 8 megapixels. If your application demands higher still-image detail or a different sensor format, this camera will not meet the requirement.

Erősségek

  • 8 megapixel IMX219 sensor captures 3280 × 2464 resolution stills
  • 1080p video at 47 fps for smooth recording
  • 1640 × 1232 at 41 fps balances detail and speed
  • 640 × 480 at 206 fps enables high-speed capture
  • Includes 15 cm FFC cable for Pi A/B and 15 cm FPC cable for Pi Zero & W

Műszaki adatok

TypeSingle Board Computers

Kérdések a termékről

Which Raspberry Pi boards does the 15 cm FFC cable and the 15 cm FPC cable connect to?

The 15 cm FFC cable fits Raspberry Pi Model A and Model B boards, while the 15 cm FPC cable fits Raspberry Pi Zero and Zero W boards.

Can the IMX219 sensor still record 1080p47 footage when used with an original Raspberry Pi Model B?

Yes, the sensor supports 1080p47, 1640 × 1232p41 and 640 × 480p206 frame rates on any compatible Pi board that provides the required CSI interface.

How can I confirm the camera is delivering the full 3280 × 2464 still resolution after installation?

Capture a test image with libcamera-still or raspistill and verify the output file dimensions read 3280 pixels wide by 2464 pixels high.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.