Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Three small green circuit boards with silver pin headers and one black USB Type-C cable

MCDODO

MCDODO ESP32-S3 DevKitC-1 N16R8 44Pin 8M PSRAM 3pcs 50cm cable

SKU CH-CA9Q-AEFAS

Three ESP32-S3 development boards with 44-pin headers and 8 MB PSRAM, plus a 50 cm USB-C cable

  • TypeSingle Board Computers
  • Triple board pack accelerates parallel prototyping
  • 44-pin headers expose full I/O for flexible wiring
  • 8 MB PSRAM enables larger buffers and smoother multitasking
  • 4 GHz Wi-Fi and Bluetooth support wireless IoT projects
  • Included 50 cm USB-C cable powers and programs the boards

ESP32-S3 development board triple pack

This set contains three ESP32-S3-DevKitC-1 boards built around the ESP32-S3-WROOM-1 N16R8 module. Each board exposes 44 pins and includes 8 MB of integrated PSRAM for larger data buffers. A single 50 cm USB Type-C cable is supplied for power and programming. The boards operate at a 3.3 V logic level and are brand new.

Makers prototyping Wi-Fi and Bluetooth IoT nodes

The pack suits developers who need several identical nodes for mesh experiments, sensor arrays or classroom labs. Builders who require a separate cable for every board, or who need on-board antenna diversity, should look at other kits. Projects that demand 5 V tolerant I/O without level shifting are not a match for the 3.3 V pin headers.

8 MB PSRAM on the N16R8 module

The N16R8 variant provides 8 MB of pseudo-static RAM directly on the wireless module, enabling heavier firmware images and larger frame buffers than zero-PSRAM alternatives. This single memory figure determines whether the board can handle your application’s runtime memory needs.

Erősségek

  • Triple board pack accelerates parallel prototyping
  • 44-pin headers expose full I/O for flexible wiring
  • 8 MB PSRAM enables larger buffers and smoother multitasking
  • 4 GHz Wi-Fi and Bluetooth support wireless IoT projects
  • Included 50 cm USB-C cable powers and programs the boards

Műszaki adatok

TypeSingle Board Computers

Kérdések a termékről

How do I install the ESP32-S3-DevKitC-1 board and what step is often missed?

Connect the 50 cm USB Type-C cable to a USB-A port that supports data, not a charge-only cable, then select the USB-to-UART or native USB port in your IDE; the charge-only cable mistake stops communication.

What maintenance or replacement will the board need later?

The board has no user-replaceable parts; keep the USB-C connector and 44-pin headers clean, and replace the cable if the Type-C plug wears out.

What limit appears first under sustained use?

The 3.3 V SPI supply and on-board regulator set the thermal ceiling; continuous high-current GPIO or radio duty cycles will hit temperature limits before flash or PSRAM wear.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.