Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Mushkin Enhanced

Mushkin Enhanced 996643 4GB (2x2GB) DDR3 1066 laptop RAM

SKU CH-PFJX-XDM10 MPN 996643

A 4 GB dual-channel DDR3 SO-DIMM kit running at 1066 MHz with CL7 timings and 1.50 V for laptop upgrades

  • Capacity4GB (2 x 2GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7-20
  • Voltage1.50V

Capacity 4GB (2 x 2GB)

CAS Latency CL7

  • Dual-channel kit boosts laptop throughput
  • CL7 latency at DDR3 1066 speed
  • 50 V operation matches stock specs
  • 5 GB/s peak bandwidth per module
  • Programmed timings for maximum system compatibility

Essentials 4GB DDR3 1066 SO-DIMM kit

The Mushkin Enhanced Essentials kit provides 4GB of DDR3 laptop memory in a matched pair of 2GB modules. Model 996643 uses 204-pin SO-DIMM form factor and runs at 1066 MT/s with CL7 timings at 1.50V. The dual-channel configuration is programmed for broad compatibility with existing memory.

For older DDR3 laptops needing a matched pair

This kit suits owners of DDR3 notebooks that accept 204-pin SO-DIMMs and benefit from dual-channel bandwidth of 8.5GB/s. Buyers whose systems require a different DDR generation, ECC functionality, registered modules, or heat spreaders should look elsewhere.

204-pin DDR3 SO-DIMM interface decides fit

The 204-pin DDR3 SO-DIMM interface is the single specification that determines whether this kit will install in a given laptop. Verify the slot type and DDR3 support before purchase.

Erősségek

  • Dual-channel kit boosts laptop throughput
  • CL7 latency at DDR3 1066 speed
  • 50 V operation matches stock specs
  • 5 GB/s peak bandwidth per module
  • Programmed timings for maximum system compatibility

Műszaki adatok

BrandMushkin Enhanced
SeriesEssentials
Model996643
Capacity4GB (2 x 2GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7-20
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesCompatible Timings
This product is programmed to use timings that offer maximum compatibility with your system and original memory.
Dual Channel Kit
Engineered for dual-channel architecture.
Compatible Frequency
This product is engineered to operate at the optimum frequency for compatibility with your system.
Szállítási súly0.05 kg
Csomagméret166 × 114 × 13 mm

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What must my laptop already support to use this 204-pin DDR3 SO-DIMM kit?

Your laptop needs DDR3 SO-DIMM slots that accept 204-pin modules and run at 1.50V. The kit is a dual-channel pair of 2 GB sticks rated for DDR3 1066 (PC3 8500) with CL7 7-7-7-20 timings.

How will these CL7 1066 MHz modules behave if my system runs memory at a lower DDR3 speed?

The modules are programmed for maximum compatibility and will run at the highest common speed your platform and any existing memory allow, using the 7-7-7-20 timings at 1.50V.

How can I verify the kit is running in dual-channel mode after installation?

Check your BIOS or a system information tool: it should show 4 GB total across two channels at DDR3 1066 (PC3 8500) with CL7 timings.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.