Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Black rectangular power brick with DC2.1 barrel connector and US plug prongs

myVolts

myVolts Raspberry Pi Build HAT Power Supply 48W 8V 6A DC2.1

SKU CH-1RH4-18ZYY

Powers a Raspberry Pi Build HAT, compatible Pi boards and LEGO Technic devices from a single 48 W, 8 V 6 A supply with a 5.5 mm by 2.1 mm DC plug

  • TypeAT
  • Powers Raspberry Pi Build HAT and LEGO Technic devices from one 48W supply
  • Runs Raspberry Pi computers except Pi 400 without extra power needed
  • Accepts worldwide AC input from 110 to 240V at 50 or 60Hz
  • Delivers stable 8V 6A DC output through 5.5mm OD 2.1mm ID connector
  • Single unit includes everything required to start building immediately

Raspberry Pi Build HAT Power Supply

This 48 W unit powers the Raspberry Pi Build HAT, the Raspberry Pi computer (except Raspberry Pi 400) and connected LEGO Technic devices from a single source. No extra power supply is needed for the attached hardware. It is designed for makers and educators building motorised LEGO projects with the Build HAT ecosystem.

Check input voltage and connector fit

The supply accepts AC 110~240 V at 50/60 Hz and delivers 8 V at 6 A through a DC2.1 plug with a 5.5 mm outer diameter and 2.1 mm inner diameter. Verify that your Build HAT or Pi board uses this exact barrel size before ordering. The package includes a US-style mains plug, so confirm it matches your local socket or have a suitable adapter ready.

Steady 8 V output under continuous motor load

The unit maintains its rated 8 V 6 A output while driving LEGO Technic motors and sensors over extended periods. This avoids the voltage sag that can occur with undersized adapters when multiple actuators run simultaneously. Stable power keeps the Pi and HAT from resetting during long build sessions or classroom demonstrations.

Erősségek

  • Powers Raspberry Pi Build HAT and LEGO Technic devices from one 48W supply
  • Runs Raspberry Pi computers except Pi 400 without extra power needed
  • Accepts worldwide AC input from 110 to 240V at 50 or 60Hz
  • Delivers stable 8V 6A DC output through 5.5mm OD 2.1mm ID connector
  • Single unit includes everything required to start building immediately

Műszaki adatok

TypeAT

Kérdések a termékről

Does the box include the Raspberry Pi Build HAT itself or only the 48W 8V 6A power supply with DC2.1 connector?

The package contains only the power supply unit. The Raspberry Pi Build HAT and any LEGO Technic devices must be purchased separately.

Should I choose this 8V 6A model for a standard Raspberry Pi 4 or is it only for the Build HAT?

This supply powers the Build HAT and compatible Raspberry Pi computers except the Raspberry Pi 400. For a standard Pi 4 without the HAT, a 5V USB-C supply is the correct choice.

What does the 48W rating mean when the supply is running a Raspberry Pi and LEGO motors?

The 48W output at 8V 6A provides enough headroom to run the Pi, the Build HAT and multiple LEGO Technic motors simultaneously without needing a second power source.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.