Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR5 ECC UDIMM sticks in silver anti-static tray

NEMIX RAM

NEMIX RAM 128GB (4 x 32GB) DDR5 4800MHz ECC UDIMM 2Rx8 1.1V

SKU CH-ARAM-5D3CE

A 128 GB kit of four 32 GB DDR5 4800 MHz ECC UDIMM modules at CL40 and 1.1 V

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 128GB total capacity across four 32GB modules
  • DDR5 4800MHz speed for high-throughput server workloads
  • ECC protection detects and corrects single-bit errors
  • 1V operation reduces power draw and heat
  • Unbuffered 288-pin UDIMM fits compatible DDR5 platforms

128GB DDR5 4800 ECC UDIMM Kit

This 128GB kit contains four 32GB unbuffered DDR5 4800 modules with ECC and a CAS latency of 40. It operates at 1.1V and uses a 2Rx8 rank configuration across 288-pin DIMMs. The memory is built with major OEM chips from Samsung, Micron or Hynix and is intended for servers or workstations that require error-correcting DDR5 4800 unbuffered memory.

Suits ECC UDIMM platforms needing 128GB at 4800MHz

This kit fits systems that take four 288-pin DDR5 ECC UDIMMs running at 4800MHz with 1.1V operation. It is not for platforms that require registered or load-reduced DIMMs. Buyers who need higher speeds, lower latency, non-ECC modules or a different module count should look at other memory options.

The deciding spec is ECC UDIMM at DDR5 4800 1.1V

Verify that your motherboard and CPU support unbuffered ECC DDR5 at 4800MHz and 1.1V before purchasing. If the platform requires registered DIMMs, a different voltage or a non-ECC configuration, this kit will not function correctly.

Erősségek

  • 128GB total capacity across four 32GB modules
  • DDR5 4800MHz speed for high-throughput server workloads
  • ECC protection detects and corrects single-bit errors
  • 1V operation reduces power draw and heat
  • Unbuffered 288-pin UDIMM fits compatible DDR5 platforms

Műszaki adatok

BrandNEMIX RAM
ModelPart#: ME38400-328K4-SM-SYS-111AD-HN2-01-G2
Part NumberPart#: ME38400-328K4-SM-SYS-111AD-HN2-01-G2
Capacity128GB (4 x 32GB)
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Kérdések a termékről

How do I install the 288-pin DDR5 UDIMM modules, and what step is often missed?

Align the key notch on each 288-pin module with the motherboard slot, press firmly until both retention clips click, and populate all four channels for 128 GB; the step often missed is verifying the BIOS recognises all four 32 GB ranks after first boot.

What maintenance or replacement will the ECC UDIMM kit need over its lifetime?

No scheduled maintenance is required; the modules are covered by a lifetime replacement warranty, so a failed stick is swapped rather than serviced.

What limit appears first when the 4800 MHz kit runs under sustained load?

The CAS latency of 40 cycles at 1.1 V is the primary timing constraint that governs sustained throughput before thermal or voltage limits become factors.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.