BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280234BTC
Raktáron
NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR4 2933 PC4-23400 CL21 288-Pin UDIMM memory upgrade
Eight 16 GB DDR4 2933 UDIMM modules totalling 128 GB at CL21 1.20 V for Supermicro workstations
- Capacity128GB (8 x 16GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128GB total capacity with eight 16GB modules
- DDR4 2933MHz speed rated at PC4-23400
- CL21 CAS latency for responsive operation
- 20V low-voltage DDR4 standard efficiency
- 288-pin UDIMM form factor fits compatible Supermicro systems
System-specific DDR4 kit for Supermicro workstations
This 128 GB kit contains eight 16 GB unbuffered UDIMM modules built for Supermicro desktop and SuperWorkstation platforms. It targets IT professionals and builders who need validated, high-density memory for mission-critical workloads without ECC overhead.
DDR4 2933 PC4-23400 CL21 at 1.20 V
The modules run at DDR4 2933 (PC4-23400) with a CAS latency of CL21 and a standard 1.20 V operating voltage. This speed and timing combination is the single specification that determines whether the kit matches the motherboard's qualified-vendor list for the target Supermicro systems.
Sustained stability through rigorous stress testing
Every module undergoes extended load testing before shipment to verify reliability under continuous enterprise workloads. The 1Rx8 organisation and major OEM DRAM chips help maintain consistent throughput during long rendering, virtualisation or database sessions rather than only in short benchmarks.
Erősségek
- 128GB total capacity with eight 16GB modules
- DDR4 2933MHz speed rated at PC4-23400
- CL21 CAS latency for responsive operation
- 20V low-voltage DDR4 standard efficiency
- 288-pin UDIMM form factor fits compatible Supermicro systems
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Kérdések a termékről
What does the 2933 MHz speed mean once the modules are installed?
The kit runs at DDR4 2933 (PC4-23400) with CL21 latency; the motherboard will set the final data rate and timings based on its memory controller and the number of modules populated.
What does the PC4-23400 rating cap in practice?
PC4-23400 is the JEDEC designation for DDR4 2933; the usable bandwidth is limited by the CPU memory controller, channel count and how many of the eight modules are installed.
What does the 288-pin UDIMM form factor need to fit?
Each 16 GB module is a standard 288-pin DDR4 UDIMM without a heat spreader, so it fits any desktop or workstation board that accepts non-ECC unbuffered DDR4 UDIMMs.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00282841BTC
Raktáron
