Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM SuperMicro MBD-C9Z590-CGW memory upgrade

SKU CH-1Y1H-V3PA2

16 GB DDR4 3200 CL22 1.2 V 288-pin UDIMM kit for SuperMicro MBD-C9Z590-CGW workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 CL22 timing balances speed and latency
  • 20 V low voltage reduces system power draw
  • 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
  • Major OEM chips ensure validated compatibility

System-Specific DDR4 Kit

This 16 GB kit contains two 8 GB DDR4 3200 modules built for the SuperMicro MBD-C9Z590-CGW motherboard. They run at 1.2 V with CL22 latency and use a 1Rx8 unbuffered non-ECC layout. The kit targets owners of that specific board who want a straightforward capacity increase.

DDR4 3200 Practical Limits

The modules operate at the DDR4 3200 (PC4-25600) data rate with a fixed CL22 timing and 1.2 V voltage. Your motherboard must support this exact speed and voltage combination; it will not automatically run faster or at lower latency. The 288-pin UDIMM form factor fits only DDR4 desktop slots.

Pre-Order Compatibility Check

Confirm that your system is the SuperMicro MBD-C9Z590-CGW and that it accepts non-ECC unbuffered UDIMMs. Verify the board has two free DDR4 slots for the dual-channel pair. Ensure the BIOS is updated to recognise 3200 MT/s modules at 1.2 V.

Erősségek

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 CL22 timing balances speed and latency
  • 20 V low voltage reduces system power draw
  • 288-pin UDIMM form factor fits SuperMicro MBD-C9Z590-CGW
  • Major OEM chips ensure validated compatibility

Műszaki adatok

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Kérdések a termékről

Should I pick the 16GB kit or a larger capacity for my SuperMicro MBD-C9Z590-CGW?

The listed kit provides 16GB in two 8GB modules; choose a larger kit only if your workload needs more than 16GB total.

What does the 3200 speed mean once installed in my system?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V, delivering the rated throughput when the motherboard enables the matching profile.

Is the 288-pin UDIMM interface compatible with my board and what does it limit?

Yes, the 288-pin DDR4 UDIMM fits the MBD-C9Z590-CGW DIMM slots; the interface caps transfer rate to the DDR4 3200 standard and does not support registered or ECC operation.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.