Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 SODIMM modules with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR5 4800 SODIMM memory upgrade

SKU CH-PYGZ-94ECT

Dual 8 GB DDR5 SODIMM kit running at 4800 MHz with CL40 latency and 1.1 V operation for compatible Supermicro systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB kit (2 × 8 GB) doubles system capacity
  • DDR5 4800 MT/s PC5-38400 bandwidth for responsive workloads
  • 1 V operation reduces power draw and heat
  • CL40 1Rx8 unbuffered timing tuned for Supermicro platforms
  • 262-pin SODIMM form factor fits compatible Supermicro IoT SuperServer systems

NEMIX 16GB DDR5 Kit for Supermicro

This NEMIX RAM kit provides 16 GB of DDR5 memory as two 8 GB SODIMM modules. It is built for Supermicro IoT SuperServer platforms such as the SYS-E100-13AD-L and CSE-E101-04. The unbuffered, non-ECC design targets embedded and edge deployments that need reliable capacity without registered overhead.

Ideal for Compatible Supermicro Builds

Technicians upgrading supported Supermicro X13SAN-L motherboards will find the correct pinout, voltage and speed validated for those boards. Systems that require ECC, registered modules or a different DDR generation cannot use this kit and must select memory matching their platform specifications.

4800 MT/s DDR5 Speed Rating

The modules operate at DDR5 4800 (PC5-38400) with a CAS latency of CL40 at 1.10 V. This speed grade is the deciding specification; the host platform must support DDR5 4800 SODIMMs for the kit to function at its rated performance.

Erősségek

  • 16 GB kit (2 × 8 GB) doubles system capacity
  • DDR5 4800 MT/s PC5-38400 bandwidth for responsive workloads
  • 1 V operation reduces power draw and heat
  • CL40 1Rx8 unbuffered timing tuned for Supermicro platforms
  • 262-pin SODIMM form factor fits compatible Supermicro IoT SuperServer systems

Műszaki adatok

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx6 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Kérdések a termékről

What slot type and pin count does this DDR5 SODIMM kit need?

The kit uses 262-pin DDR5 SODIMM modules that fit standard DDR5 SODIMM slots in compatible Supermicro systems.

How are the modules seated correctly, and what step is often missed?

Align the notch on each module with the slot key, press straight down until the side retention clips snap into place on both ends.

Will the memory require any firmware updates or component replacement over time?

No firmware updates are needed; the modules run at 1.10 V with CL40 latency and have no heat spreaders or moving parts to replace.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.