Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green rectangular DDR4 SODIMM module with gold edge contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2133 CL15 2Rx8 1.2V 260-pin SODIMM memory upgrade

SKU CH-FX4P-2Y2ME

16 GB DDR4 2133 MHz SODIMM module built for POSIFLEX XT-6315 terminals

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 SODIMM expands POS terminal memory capacity
  • 2133 MHz PC4-17000 speed matches system memory bus
  • CL15 latency at 1.2 V reduces access delay
  • 2Rx8 dual-rank organisation fills single 260-pin slot
  • Samsung Micron Hynix chips validated for POSIFLEX XT-6315 compatibility

16 GB DDR4 SODIMM for POSIFLEX XT-6315

This 16 GB DDR4 2133 MHz SODIMM module is built for the POSIFLEX XT-6315 JIVA High-End Fanless POS Terminal with Celeron chipset. It targets technicians and IT managers who need a reliable memory upgrade for point-of-sale or kiosk deployments. The single-rank 2Rx8 configuration runs at 1.2 V without ECC or buffering.

Check DDR4 SODIMM slot and 2133 MHz support

Verify that the terminal has a free 260-pin DDR4 SODIMM slot and that its BIOS accepts 2133 MHz PC4-17000 non-ECC unbuffered memory at CL15 latency. The module uses major OEM chips from Samsung, Micron or Hynix. No heat spreader is fitted, so physical clearance is minimal.

Passive cooling suits fanless terminal operation

Without a heat spreader the module relies on the system's passive airflow, matching the fanless design of the XT-6315. Power draw stays low at the standard 1.2 V DDR4 voltage, producing minimal heat and no audible noise. This keeps the terminal stable during continuous retail or hospitality workloads.

Erősségek

  • 16 GB DDR4 SODIMM expands POS terminal memory capacity
  • 2133 MHz PC4-17000 speed matches system memory bus
  • CL15 latency at 1.2 V reduces access delay
  • 2Rx8 dual-rank organisation fills single 260-pin slot
  • Samsung Micron Hynix chips validated for POSIFLEX XT-6315 compatibility

Műszaki adatok

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-628K1
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Kérdések a termékről

Does the package include anything besides the single 16 GB SODIMM stick?

The box contains only the 16 GB DDR4 2133 CL15 2Rx8 1.2 V 260-pin SODIMM module; no tools, cables or extra sticks are supplied.

Why choose the 16 GB 2Rx8 CL15 version instead of a lower-capacity or different-latency module?

This 16 GB 2Rx8 CL15 kit matches the POSIFLEX XT-6315 JIVA specification exactly, so the terminal recognises the full capacity and timing without manual configuration.

What does the 2133 MHz PC4-17000 rating mean once the module is installed in the POS terminal?

The memory runs at 2133 MT/s with CL15 latency at 1.2 V, delivering the standard PC4-17000 bandwidth the Celeron chipset expects for stable fanless operation.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.