Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green 260-pin DDR4 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX EK-2152 memory upgrade

SKU CH-506T-T8D4Y

16 GB DDR4-3200 SODIMM upgrade for POSIFLEX EK-2152 kiosks, CL22 1.2 V

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB capacity expands POS kiosk memory headroom
  • DDR4 3200 speed matches system bus for stable throughput
  • CL22 latency keeps timing within POSIFLEX EK-2152 spec
  • 2V operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits Mercury Series slot directly

POSIFLEX EK-2152 memory upgrade

This 16GB DDR4 SODIMM is built specifically for the POSIFLEX EK-2152 Mercury Series kiosk. It targets system integrators and IT staff who need a validated module for point-of-sale hardware. The 260-pin form factor fits the factory memory slot without adapters.

CL22 3200MHz single-module kit

The kit contains one 16GB stick rated at 3200MHz PC4-25600 with CL22 latency. It runs at the standard 1.20V and uses a 2Rx8 unbuffered non-ECC layout. Major-brand Samsung, Micron or Hynix ICs are selected and stress-tested for stability. No heat spreader is included, matching the original chassis airflow design.

16GB capacity ceiling for this platform

A single 16GB module fills the supported slot and raises total system memory to the platform maximum. Everyday POS workloads, multi-tab browsers and background services run with ample headroom. Workloads that demand more than 16GB total memory will exceed what this hardware can address.

Erősségek

  • 16GB capacity expands POS kiosk memory headroom
  • DDR4 3200 speed matches system bus for stable throughput
  • CL22 latency keeps timing within POSIFLEX EK-2152 spec
  • 2V operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits Mercury Series slot directly

Műszaki adatok

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Kérdések a termékről

Will the 16 GB DDR4 SODIMM need any firmware updates or periodic re-seating after installation in the POSIFLEX EK-2152?

No firmware updates are required; the module is a standard 260-pin DDR4 SODIMM that remains seated once installed correctly.

What thermal or power limit appears first when the POSIFLEX EK-2152 runs this 1.2 V CL22 memory continuously?

The 1.2 V operating voltage keeps power draw low, so the system's own thermal envelope is reached before the memory itself becomes a limit.

How much heat and fan noise does the 3200 MHz 2Rx8 module add during all-day kiosk operation?

Without a heat spreader the module runs cool at 1.2 V, adding negligible heat and no audible noise to the kiosk.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.