Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz ECC UDIMM CL46 1Rx8 1.1V 288-pin memory upgrade

SKU CH-RESR-62W7D

16 GB DDR5 ECC UDIMM at 5600 MHz, CL46, 1.1 V, single-rank 1Rx8, 288-pin, verified for Supermicro X13SAW-TLN4F motherboards

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5-5600 ECC UDIMM adds error-correcting capacity for stable workloads
  • CL46 timing at 1.1 V matches the board's memory controller for rated-speed operation
  • 1Rx8 unbuffered 288-pin form factor fits the Supermicro X13SAW-TLN4F DIMM slots exactly
  • Major OEM Samsung, Micron or Hynix DRAM chips deliver consistent signal integrity
  • Lifetime replacement coverage with US-based technical support protects the investment

Exact DDR5-5600 ECC UDIMM for Supermicro

This 16GB NEMIX RAM module delivers DDR5 5600 speed at CL46 with 1.1V operation. It is built as a 1Rx8 unbuffered ECC UDIMM using 288-pin layout. The part targets users who need validated memory for this specific Supermicro motherboard.

Straightforward 288-pin installation

The module seats in the standard DDR5 UDIMM slot on the X13SAW-TLN4F board. No heat spreader is fitted so clearance is minimal. Consult the motherboard manual for the approved DIMM population order before fitting to avoid a no-post condition.

1Rx8 rank and 1.1V voltage must match the controller

The memory controller expects exactly this rank structure and voltage for stable operation at the rated PC5-44800 speed. Builders who need registered DIMMs or SODIMM form factors cannot use this kit.

Erősségek

  • 16 GB DDR5-5600 ECC UDIMM adds error-correcting capacity for stable workloads
  • CL46 timing at 1.1 V matches the board's memory controller for rated-speed operation
  • 1Rx8 unbuffered 288-pin form factor fits the Supermicro X13SAW-TLN4F DIMM slots exactly
  • Major OEM Samsung, Micron or Hynix DRAM chips deliver consistent signal integrity
  • Lifetime replacement coverage with US-based technical support protects the investment

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How do I confirm the module is running at 5600MHz with CL46 after installation?

Enter the system BIOS or use a hardware-monitoring utility and verify the reported speed reads DDR5 5600 (PC5-44800) and the CAS latency shows CL46 at 1.10 V.

What comes in the package and do I need any extra parts?

The box contains one 16 GB 288-pin DDR5 ECC UDIMM; no heat spreader, cables or additional components are included.

Which version should I choose for a Supermicro X13SAW-TLN4F motherboard?

Select the 16 GB DDR5 5600MHz PC5-44800 1Rx8 CL46 1.1 V unbuffered ECC UDIMM (part ME44800-618K1) that matches the board's exact memory population rules.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.