Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (12x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Cisco UCS X210c M7 memory upgrade

SKU CH-8TPN-VPKDC

12-module DDR5 4800 kit delivers 192 GB of ECC registered server memory for Cisco UCS X210c M7 compute nodes

  • Capacity192GB (12 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 192 GB capacity from 12 x 16 GB modules scales Cisco UCS X210c M7 compute nodes
  • DDR5 4800 speed with CL40 latency delivers registered ECC throughput for mission-critical workloads
  • 1 V operation reduces power draw across all 12 RDIMM modules
  • 288-pin DDR5 RDIMM form factor installs directly into Cisco UCS X210c M7 memory slots
  • Major OEM Samsung, Micron, Hynix chips validated for enterprise server stability

Cisco UCS X210c M7 192GB Kit

This 192GB memory kit contains twelve 16GB DDR5 4800 registered DIMMs validated for the Cisco UCS X210c M7 compute node. It is built for administrators who need maximum capacity in a single server refresh. Buyers who require non-ECC modules or desktop DIMMs cannot use this kit.

Registered ECC 288-pin RDIMM build

Each module is a 1Rx8 registered ECC RDIMM operating at 1.10V without a heat spreader. The registered buffer and error-correcting code protect data integrity under sustained enterprise workloads. The 288-pin DDR5 form factor fits only motherboards wired for DDR5 RDIMM slots.

DDR5 4800 CL40 1Rx8 specification

The kit runs at DDR5 4800 (PC5-38400) with CAS latency 40 and a single-rank 1Rx8 organisation per module. This speed and latency combination determines whether the memory matches the compute node's qualified vendor list. Systems that demand a different data rate or rank configuration will not accept this kit.

Erősségek

  • 192 GB capacity from 12 x 16 GB modules scales Cisco UCS X210c M7 compute nodes
  • DDR5 4800 speed with CL40 latency delivers registered ECC throughput for mission-critical workloads
  • 1 V operation reduces power draw across all 12 RDIMM modules
  • 288-pin DDR5 RDIMM form factor installs directly into Cisco UCS X210c M7 memory slots
  • Major OEM Samsung, Micron, Hynix chips validated for enterprise server stability

Műszaki adatok

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K12
Capacity192GB (12 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content192GB (12X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kérdések a termékről

What does the DDR5 4800 (PC5-38400) standard mean for real-world throughput on this kit?

The modules run at 4800 MT/s with CL40 latency; registered buffering adds one clock cycle to command timing, so sustained throughput depends on the Cisco UCS X210c M7 memory controller and population rules.

What physical slot and clearance does each 16 GB RDIMM require in the Cisco UCS X210c M7?

Each module is a 288-pin DDR5 RDIMM without a heat spreader, so it fits standard DDR5 DIMM slots; verify the node’s slot count and any height restriction before installing all 12 modules.

What is the correct installation sequence for the 12-module kit in the Cisco UCS X210c M7, and which step is most often missed?

Populate slots per the node’s memory population guide — typically balanced across channels — then enable ECC in BIOS; the step most often missed is confirming the firmware recognises all 192 GB at 4800 MT/s before deploying workloads.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.