Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-XM53-9ERDC

192GB DDR5 4800 ECC RDIMM kit with CL40 timing for Supermicro H13SVW-N servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Még 12 konfiguráció megtekintése

Speed 4800MHz

  • 192 GB total capacity for memory-intensive workloads using two 96 GB modules
  • DDR5 4800 speed with CL40 latency matches the server's rated timing
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 1 V operation and 2Rx4 rank align with the H13SVW-N memory controller
  • 288-pin RDIMM form factor fits the Supermicro motherboard's DIMM slots

Exact-fit DDR5-4800 kit for Supermicro H13SVW-N

This 192GB kit uses two 96GB registered ECC RDIMMs built to the DDR5 4800 standard. The modules run at 1.1V with CL40 timing and a 2Rx4 organisation that matches the motherboard's memory-controller expectations. Servers needing maximum registered capacity per slot are the intended users.

DDR5 4800 caps usable speed at PC5-38400

The memory controller on the H13SVW-N will not exceed the JEDEC base data rate of 4800 MT/s, so faster modules would downclock to this level. Registered buffering adds a cycle of latency but allows every DIMM slot to be populated without signal degradation. ECC correction handles single-bit errors transparently.

Replaces smaller or slower RDIMM sets when full

If the board currently runs lower-capacity registered modules, this kit fills the remaining slots at the rated voltage and rank configuration. The upgrade is worthwhile when the workload demands the full 192GB at native DDR5 4800 rather than a mixed-speed or reduced-capacity arrangement.

Erősségek

  • 192 GB total capacity for memory-intensive workloads using two 96 GB modules
  • DDR5 4800 speed with CL40 latency matches the server's rated timing
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 1 V operation and 2Rx4 rank align with the H13SVW-N memory controller
  • 288-pin RDIMM form factor fits the Supermicro motherboard's DIMM slots

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Should I choose the 192GB kit or a different capacity for my Supermicro H13SVW-N?

The 192GB kit provides two 96GB modules that match the board's DDR5 4800 registered ECC specification; other capacities would require verifying the motherboard's qualified vendor list for supported DIMM sizes and population rules.

What does the DDR5 4800 speed deliver once installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for stable operation at rated throughput.

How does the 288-pin RDIMM interface affect compatibility and performance limits?

The 288-pin registered DIMM form factor is required by the H13SVW-N; the registered buffer lets all slots run fully populated at 192GB while ECC corrects single-bit errors on the fly.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.