BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277761BTC
Raktáron
NEMIX RAM
NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 1.1V ECC RDIMM SuperMicro Server memory upgrade
256 GB kit of sixteen 16 GB DDR5 4800 CL40 ECC registered DIMMs at 1.1 V for SuperMicro Hyper SuperServer systems
- Capacity256GB (16 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity from 16 matched 16 GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered RDIMM design protects data integrity under load
- 1 V operating voltage reduces power draw per module
- Qualified for SuperMicro Hyper SuperServer SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R
256GB DDR5 ECC RDIMM kit
This 256GB kit contains sixteen 16GB DDR5 4800 ECC RDIMM modules. It is built for SuperMicro Hyper SuperServer systems including the SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R. The registered design and error-correcting code suit enterprise workloads that require data integrity.
DDR5 4800 CL40 1.1V registered limits
The modules run at DDR5 4800 (PC5-38400) with a CAS latency of 40 at 1.1V. Registered buffering adds one clock cycle of latency and the memory controller must support ECC RDIMM operation. Maximum capacity and population rules are defined by the server platform, not by the kit itself.
288-pin RDIMM installation notes
Each module uses the standard 288-pin DDR5 RDIMM form factor without a heat spreader. Align the key notch with the slot and press firmly until the latches click. Common issues include mixing registered with unbuffered DIMMs, exceeding the platform's supported rank count per channel, or leaving slots unpopulated in a required sequence.
Erősségek
- 256 GB total capacity from 16 matched 16 GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered RDIMM design protects data integrity under load
- 1 V operating voltage reduces power draw per module
- Qualified for SuperMicro Hyper SuperServer SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Kérdések a termékről
Should I pick the 16×16 GB kit or a smaller capacity for my SuperMicro server?
The 16×16 GB kit delivers 256 GB total and fills all 16 DIMM slots on the SYS-121H-TNR, SYS-221H-TNR or SYS-221H-TN24R; choose a smaller kit only if you need empty slots for future expansion.
What does the DDR5 4800 CL40 rating actually give me in these SuperMicro Hyper SuperServer systems?
The modules run at 4800 MT/s with CAS latency 40 at 1.1 V, providing the maximum JEDEC-standard throughput the platform supports without overclocking.
How does the 288-pin RDIMM interface limit performance on the SYS-121H-TNR and SYS-221H-TNR?
The registered 288-pin DDR5 RDIMM interface caps speed at the platform’s native 4800 MT/s and requires ECC registered modules; unbuffered or faster DIMMs will not operate.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280345BTC
Raktáron
