BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.002756BTC
Raktáron
NEMIX RAM
NEMIX RAM 256GB 4x64GB DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H14SST-G memory upgrade
256 GB DDR5-5600 ECC registered RDIMM kit (4 × 64 GB, CL46, 1.1 V) validated for Supermicro H14SST-G motherboards
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB capacity from four matched 64 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC architecture prevents silent data corruption
- 1 V operation matches server memory controller spec
- Verified fit for Supermicro H14SST-G motherboard
256GB DDR5-5600 ECC RDIMM kit for Supermicro
This 256GB kit contains four 64GB DDR5-5600 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SST-G memory controller expects. The modules operate at 1.1V with CL46 latency and use the 288-pin RDIMM form factor required by this motherboard. It is intended for administrators who need to populate all slots with validated capacity.
Registered architecture
Registered buffering offloads the memory controller so every slot runs fully populated at the rated 5600 MT/s speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption. The 2Rx4 organisation and 1.1V operation match the board's electrical requirements for sustained enterprise workloads. Stability is maintained across continuous operation without downclocking.
Verify manual population rules before ordering
Server memory support varies by model, so consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps. The kit requires four available 288-pin RDIMM slots and a platform that accepts 2Rx4 registered ECC modules at 1.1V. Buyers needing a different capacity, rank configuration or unbuffered memory should look elsewhere.
Erősségek
- 256 GB capacity from four matched 64 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC architecture prevents silent data corruption
- 1 V operation matches server memory controller spec
- Verified fit for Supermicro H14SST-G motherboard
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Kérdések a termékről
How much power does the 256GB DDR5 5600 kit draw at 1.1V under continuous load?
The kit runs at 1.1V with CL46 timing; registered ECC modules at this voltage typically draw modest power per DIMM, so the four 64GB sticks together stay within normal server memory power envelopes for all-day operation.
What motherboard slot type is required to install these 288-pin RDIMMs?
The Supermicro H14SST-G must provide 288-pin DDR5 RDIMM slots; the kit will not fit UDIMM or SODIMM sockets and requires the board's registered memory population rules to be followed.
Will the 2Rx4 registered ECC modules work in a system that currently uses 1Rx8 unbuffered DDR5?
No, registered RDIMMs and unbuffered UDIMMs cannot be mixed; the memory controller expects registered modules with ECC, so all slots must be populated with matching registered DIMMs.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00278164BTC
Raktáron
