Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR4 ECC UDIMM sticks, 32GB kit, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR4 2666 ECC UDIMM CL19 1.2V Synology RS2421+ memory upgrade

SKU CH-3E51-FAQHE

32 GB kit of two 16 GB DDR4 2666 ECC UDIMM modules at 1.2 V, CL19, validated for Synology RS2421+

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit doubles NAS capacity for larger workloads
  • DDR4 2666 speed matches Synology RS2421+ specifications
  • ECC protection guards data integrity in mission-critical storage
  • 2 V operation keeps power draw low
  • 288-pin UDIMM design enables straightforward self-installation

Synology RS2421+ DDR4 ECC kit

This 32 GB kit contains two 16 GB DDR4 2666 ECC unbuffered UDIMMs built for the Synology RackStation RS2421+ and RS2421RP+. Each module runs at 1.2 V with CL19 latency and uses a 288-pin layout. The memory is validated for NAS workloads that demand error correction.

Sustained-load behaviour with ECC

Under continuous operation the ECC logic detects and corrects single-bit errors, preventing silent data corruption during long file transfers or backup jobs. Unbuffered topology keeps latency low while the 2Rx8 organisation maintains stable throughput across both DIMMs. Modules are stress-tested at rated speed before shipping.

Pre-installation checks for RS2421+

Confirm the NAS has two free UDIMM slots and that the firmware supports 32 GB total capacity. Verify the chassis can accept standard-height 288-pin sticks without a heat spreader. Ensure the system is powered down and disconnected before opening the memory compartment.

Erősségek

  • 32 GB kit doubles NAS capacity for larger workloads
  • DDR4 2666 speed matches Synology RS2421+ specifications
  • ECC protection guards data integrity in mission-critical storage
  • 2 V operation keeps power draw low
  • 288-pin UDIMM design enables straightforward self-installation

Műszaki adatok

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered UDIMM
Part NumberME21300-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN ECC Unbuffered UDIMM KIT

Kérdések a termékről

How much power will the 1.20 V DDR4 2666 kit draw when the NAS runs continuously?

Each module operates at 1.20 V, the standard DDR4 voltage, so total power draw stays within the platform's normal memory budget for 32 GB.

What must the RS2421+ already have for this 288-pin ECC UDIMM kit to work?

The Synology RS2421+ needs free DDR4 UDIMM slots and a BIOS that accepts ECC unbuffered memory; the kit is validated for that platform.

Will the CL19 2666 MT/s modules run stably alongside any original sticks I keep in the RS2421+?

The kit is tested for the RS2421+/RS2421RP+; matching speed, voltage and ECC type lets the system train all populated slots together.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.