Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 RDIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V ECC RDIMM 1Rx8 288-pin memory upgrade

SKU CH-W392-WRJT7

DDR5 4800 ECC registered 32 GB kit (2×16 GB) validated for Supermicro UP SuperServer SYS-111C-NR and SYS-521C-NR systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency
  • ECC registered design protects data integrity
  • 10 V operation reduces power draw
  • Validated for SuperMicro SYS-111C-NR and SYS-521C-NR systems

DDR5 4800 ECC RDIMM kit

This 32 GB kit contains two 16 GB registered DDR5 modules rated at 4800 MT/s with CL40 latency. It is built for Supermicro server and workstation platforms that require error-correcting registered memory.

Capacity and headroom

The 32 GB total splits across two 1Rx8 modules, giving dual-channel bandwidth on compatible boards. Workloads that exceed 32 GB will need additional DIMM slots or higher-density modules to continue scaling.

Build and daily use

Modules run at 1.1 V without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM form factor fits registered DDR5 slots only; it will not work in unbuffered desktop or laptop sockets.

Erősségek

  • 32 GB capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency
  • ECC registered design protects data integrity
  • 10 V operation reduces power draw
  • Validated for SuperMicro SYS-111C-NR and SYS-521C-NR systems

Műszaki adatok

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kérdések a termékről

Will the 288-pin DDR5 4800 RDIMM modules work alongside the existing DDR5 DIMMs in my SuperMicro server?

The kit uses DDR5 4800 RDIMM modules with CL40 latency and 1.10V voltage. For stable operation, any existing DDR5 DIMMs should match these specifications, particularly the registered ECC design and 1Rx8 rank configuration.

How can I confirm the 32GB kit is running at 4800 MT/s with ECC active after installation?

Enter the system BIOS or UEFI and verify the memory speed reads 4800 MT/s (PC5-38400) and that ECC is reported as enabled. The CL40 timing and 1.10V voltage should also be visible in the memory configuration screen.

Does the package include the two 16GB RDIMM modules only, or are any brackets or cables supplied?

The package contains only the two 16GB DDR5 4800 CL40 1.10V ECC RDIMM modules (288-pin, 1Rx8). No heat spreaders, brackets, cables or additional accessories are included.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.