Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green 288-pin DDR5 RDIMM modules, no heat spreader, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V ECC Registered RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-KS1X-A253D

A 32 GB DDR5 registered ECC kit with two 16 GB modules running at 5600 MT/s, CL46 and 1.1 V for the Supermicro H13SSL-N motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Még 24 konfiguráció megtekintése
  • 32 GB capacity from two 16 GB modules expands server memory headroom
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSL-N
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller voltage specification
  • 288-pin RDIMM form factor fits the exact slot type the motherboard requires

Supermicro H13SSL-N DDR5 RDIMM kit

This 32 GB kit provides two 16 GB DDR5-5600 registered ECC modules built for the Supermicro H13SSL-N motherboard. Each stick runs at 1.1 V with CL46 latency and a 1Rx8 organisation. The 288-pin RDIMM form factor matches the board's registered-memory slots exactly.

Suited for capacity upgrades on H13SSL-N systems

Administrators expanding memory on a validated Supermicro H13SSL-N platform will receive the correct registered ECC configuration without guesswork. Builders using consumer boards, unbuffered DIMM slots, or SODIMM form factors cannot use this kit and should look for memory that matches their platform.

32 GB registered ECC capacity

The dual-rank kit delivers 32 GB of error-correcting memory that the memory controller can address fully populated at rated speed. Workloads requiring larger per-socket capacities, higher frequencies, or lower latencies than CL46 will exceed what this specific kit provides.

Erősségek

  • 32 GB capacity from two 16 GB modules expands server memory headroom
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSL-N
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller voltage specification
  • 288-pin RDIMM form factor fits the exact slot type the motherboard requires

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Does my Supermicro H13SSL-N motherboard need to support DDR5 5600 Registered ECC RDIMMs for this kit to work?

Yes, the H13SSL-N must accept DDR5 5600 Registered ECC RDIMMs; the kit is spec-matched to that board's memory-population rules and 288-pin RDIMM form factor.

Can I mix these 1Rx8 CL46 modules with existing DDR5 RDIMMs of a different rank or latency in the same server?

Mixing ranks or latencies is not recommended; the board's memory controller expects uniform 1Rx8 CL46 timing across all populated slots for stable operation at full 5600 speed.

How do I verify the kit is running at DDR5 5600 with ECC active after installation?

Check the BIOS memory information or OS hardware report for 5600 MT/s speed, CL46 timings, 1.1V voltage and ECC status reported as enabled on each 16 GB module.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.