BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277496BTC
Raktáron
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5-6400 ECC RDIMM CL52 1.1V 1Rx8 Supermicro H13DSG-OM
A 32 GB DDR5-6400 registered ECC kit (2 × 16 GB, CL52, 1.1 V, 1Rx8, 288-pin) validated for the Supermicro H13DSG-OM motherboard
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit installs at rated speed without manual tuning
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1Rx8 dual-rank layout enables full-capacity population across all server slots
- 10 V operation reduces power draw while maintaining enterprise stability
- 288-pin RDIMM form factor fits Supermicro H13DSG-OM motherboard memory slots
Exact-Match DDR5 Kit
This 32 GB kit contains two 16 GB DDR5-6400 RDIMMs rated at CL52 and 1.1 V. Registered ECC modules with 1Rx8 organisation are built to the precise timing and voltage the Supermicro H13DSG-OM memory controller expects. The kit is supplied new and validated for that specific platform.
Registered ECC Integration
Each module uses the 288-pin RDIMM form factor required by the motherboard, not UDIMM or SODIMM. Registered buffering offloads the memory controller so every populated slot can run at the rated 6400 MT/s speed. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads.
Low-Voltage DDR5 Operation
The modules operate at 1.1 V without heat spreaders, relying on the server chassis airflow for cooling. Registered architecture reduces electrical load on the memory controller during full-population scenarios. Power draw scales with the number of installed DIMMs and the configured memory frequency.
Erősségek
- Exact-match DDR5-6400 kit installs at rated speed without manual tuning
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1Rx8 dual-rank layout enables full-capacity population across all server slots
- 10 V operation reduces power draw while maintaining enterprise stability
- 288-pin RDIMM form factor fits Supermicro H13DSG-OM motherboard memory slots
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Kérdések a termékről
Will the DDR5-6400 speed hold under continuous load on the Supermicro H13DSG-OM?
The kit is rated at DDR5-6400 with CL52 latency at 1.1V; registered ECC architecture offloads the memory controller so every slot runs fully populated at full capacity without downclocking.
How much heat and noise do the modules add when the server runs all day?
The RDIMMs have no heat spreader and draw only 1.1V, so thermal output is minimal and they add no audible noise; system fans handle any residual warmth.
What motherboard slot and population rules must my Supermicro H13DSG-OM already support?
The board needs 288-pin DDR5 RDIMM slots and must accept 1Rx8 registered ECC modules in a two-DIMM kit; consult the manual for the approved population order.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280077BTC
Raktáron
