Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green bare circuit board memory module with black chips and gold edge contacts

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz PC5-44800 CL46 2Rx8 1.1V ECC UDIMM Supermicro H13SRD-F/H13SRE-F memory upgrade

SKU CH-Q9SG-YN7AF

A 48 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro H13SRD-F and H13SRE-F motherboards

  • Capacity48GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 48GB

  • 48 GB capacity expands system memory for demanding workloads
  • DDR5 5600 speed delivers rated bandwidth for Supermicro H13SRD-F/H13SRE-F
  • ECC protection corrects single-bit errors to prevent data corruption
  • 2Rx8 unbuffered UDIMM matches motherboard slot and population rules
  • 10 V operation meets JEDEC standard for efficient power use

Targeted server upgrade

This 48GB DDR5 5600MHz module is built for the Supermicro H13SRD-F and H13SRE-F motherboards. The 288-pin Unbuffered ECC UDIMM matches the exact rank, voltage and timing the board expects so the system recognises the full capacity at rated speed. It is not suited for platforms that require registered DIMMs or SODIMM form factors.

Thermals and power

Operating at 1.1V with a CL46 latency the module draws minimal power and runs without a heat spreader. Passive cooling relies on chassis airflow so adequate case ventilation is required. No active cooling or additional power connectors are involved.

ECC reliability benefit

On-die error correction detects and corrects single-bit errors automatically preventing silent data corruption and unplanned reboots. The package contains only the memory module; no software utilities or extra accessories are included. Consult the motherboard manual for approved population order before installation.

Erősségek

  • 48 GB capacity expands system memory for demanding workloads
  • DDR5 5600 speed delivers rated bandwidth for Supermicro H13SRD-F/H13SRE-F
  • ECC protection corrects single-bit errors to prevent data corruption
  • 2Rx8 unbuffered UDIMM matches motherboard slot and population rules
  • 10 V operation meets JEDEC standard for efficient power use

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K1
Capacity48GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How do I install the 48GB DDR5 5600MHz ECC UDIMM in my Supermicro H13SRD-F, and which slot population rule is most often missed?

Power down the system, open the chassis, and align the 288-pin module with the DDR5 slot key. The step most often missed is following the motherboard manual's exact DIMM population order for 2Rx8 modules to ensure full 48GB recognition at 5600MHz.

What maintenance or replacement will this 48GB DDR5 ECC UDIMM need during its service life?

No scheduled maintenance is required for the DDR5 ECC UDIMM itself. The module has no heat spreader or moving parts. Replacement would only be necessary if a hardware fault occurs, which is covered by the lifetime replacement warranty.

What limit appears first when this 48GB DDR5 5600MHz CL46 module runs sustained workloads?

The primary limit under sustained use is the DDR5 5600MHz speed rating and CL46 latency at 1.1V. The unbuffered ECC design corrects single-bit errors on the fly, but throughput cannot exceed the rated PC5-44800 specification.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.