BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277543BTC
Raktáron
NEMIX RAM
NEMIX RAM 4GB DDR4 2133 PC4-17000 CL15 1Rx8 1.2V 288-pin UDIMM memory upgrade
A 4 GB DDR4 2133 UDIMM with CL15 latency, 1.2 V operation and Samsung chipset compatibility
- Capacity4GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 4GB capacity adds responsive multitasking headroom
- DDR4 2133 speed delivers reliable data throughput
- CL15 latency supports snappy system response
- 2V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop DIMM slots
Samsung DDR4 2133 UDIMM
This 4 GB DDR4 2133 module is built for Samsung desktop PCs that accept non-ECC unbuffered UDIMMs. It uses major-brand Samsung, Micron or Hynix chips in a 1Rx8 layout and runs at the standard 1.20 V. The part number MD17000-418K1 cross-references Samsung M378A5143DB0-CPB for direct replacement.
Check DDR4 2133 UDIMM support
Verify that your Samsung desktop motherboard has a free 288-pin DDR4 slot and is rated for PC4-17000 speed with CL15 timing. Confirm the board does not require ECC or registered memory, because this stick is neither. Consult the system manual for maximum capacity per slot and total system limit before ordering.
Single stick no heat spreader
The package contains only the bare 4 GB UDIMM without a heat spreader or any bundled software. No cables, adapters or documentation are included beyond the module itself. Installation is a simple press-in procedure that takes minutes, but thermal headroom in tight chassis may be lower than with spreader-equipped kits.
Erősségek
- 4GB capacity adds responsive multitasking headroom
- DDR4 2133 speed delivers reliable data throughput
- CL15 latency supports snappy system response
- 2V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop DIMM slots
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Desktop PC Compatible Series Memory |
| Model | Samsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD17000-418K1 |
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR4 2133MHZ PC4-17000 1Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM |
Kérdések a termékről
Does the module ship with any accessories or do I need to buy a heat spreader separately?
The package contains only the single 4 GB DDR4 UDIMM; no heat spreader or extra parts are included and none are required for installation.
Should I pick this 4 GB CL15 stick or look for a different capacity in the same series?
This part is a single 4 GB module rated at DDR4 2133 CL15; choose it when your board has a free 288-pin slot and you need exactly 4 GB, otherwise select the higher-capacity variant that matches your target total memory.
What does the 2133 MT/s rating actually deliver once the stick is seated in my desktop?
The module runs at 2133 MT/s with CL15 latency at 1.20 V, giving standard DDR4 bandwidth for everyday desktop workloads when the motherboard supports that speed.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280124BTC
Raktáron
