Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Eight green DDR5 RDIMM modules in a row, gold contacts visible, no heat spreaders

NEMIX RAM

NEMIX RAM 512GB 8x64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H13SST-GC memory upgrade

SKU CH-VZSK-TGGNM

Eight-module 512 GB DDR5 ECC RDIMM kit running at 4800 MT/s with CL40 timing, 1.1 V operation and 2Rx4 registered architecture validated for Supermicro H13SST-GC motherboards

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

Még 24 konfiguráció megtekintése
  • 512 GB total capacity from eight 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 1 V registered ECC RDIMM architecture offloads the memory controller
  • 2Rx4 dual-rank organisation enables full population on the Supermicro H13SST-GC
  • 288-pin RDIMM form factor fits the motherboard's memory slots exactly

512GB DDR5 RDIMM kit for Supermicro H13SST-GC

This 512GB kit contains eight 64GB DDR5-4800 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SST-GC memory controller expects. Each 288-pin RDIMM runs at 1.1V with CL40 latency and a 2Rx4 organisation. The registered architecture is required by this motherboard and will not work in systems that accept only unbuffered UDIMMs or SODIMMs.

Sustained load behaviour with registered ECC

Registered buffering reduces electrical load on the memory controller so all eight slots can operate at the rated 4800 MT/s continuously without throttling. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during long compute runs. The 1.1V operating voltage keeps power draw predictable across fully populated channels.

Build quality and daily implications

Modules use major OEM DRAM from Samsung, Micron or Hynix without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM form factor locks securely into the H13SST-GC DIMM slots in the population order specified by the board manual. Buyers who need a different capacity per module, a UDIMM form factor, or non-ECC memory cannot use this kit.

Erősségek

  • 512 GB total capacity from eight 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 1 V registered ECC RDIMM architecture offloads the memory controller
  • 2Rx4 dual-rank organisation enables full population on the Supermicro H13SST-GC
  • 288-pin RDIMM form factor fits the motherboard's memory slots exactly

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How much power does the 1.1V DDR5-4800 kit draw when the server runs continuously?

Each module operates at 1.10V; total system draw depends on the Supermicro H13SST-GC motherboard's memory controller and the workload applied.

What must the motherboard provide for this 8-module kit to be recognised at full 512GB capacity?

The Supermicro H13SST-GC must support 288-pin DDR5 RDIMMs, Registered ECC operation, 2Rx4 organisation and the full eight-slot population per its manual.

Will the CL40 registered ECC modules work with existing DDR5 RDIMMs of different speed or rank?

Mixing is possible only if the board's memory population rules allow it; the kit runs at DDR5-4800 CL40 2Rx4, so any other DIMMs must match voltage and registered ECC type.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.