Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 512GB DDR5 5600 4Rx4 ECC RDIMM 4x128GB memory upgrade

SKU CH-B3ZX-9WZG8

512GB DDR5 5600 4Rx4 ECC Registered RDIMM kit (4x128GB) validated for the Supermicro X14SDW-36CE-SP9F motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

  • 512 GB total capacity from four 128 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 4Rx4 form factor matches Supermicro X14SDW-36CE-SP9F population rules exactly
  • Lifetime replacement warranty with free US-based technical support included

Exact-fit DDR5 512GB kit

This 4 x 128 GB DDR5-5600 registered ECC RDIMM kit is built for the Supermicro X14SDW-36CE-SP9F motherboard. It matches the board's required 288-pin RDIMM form factor, 1.1 V operating voltage, CL46 timing and 4Rx4 rank structure so the memory controller recognises every module at full rated speed.

Replaces partial or mismatched DDR5 population

When a server runs with fewer than four slots filled or with modules that differ in rank or voltage, the memory controller may downclock or disable ECC. Installing this matched quad-kit restores full-channel bandwidth and registered buffering across all populated slots, eliminating the instability that mixed populations introduce.

512 GB registered ECC headroom

The 512 GB total capacity supports large in-memory databases, virtualisation clusters and high-thread-count compute jobs while on-die ECC corrects single-bit errors before they reach the OS. Workloads that exceed 512 GB or that require unbuffered UDIMM or SODIMM form factors cannot use this kit.

Erősségek

  • 512 GB total capacity from four 128 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 4Rx4 form factor matches Supermicro X14SDW-36CE-SP9F population rules exactly
  • Lifetime replacement warranty with free US-based technical support included

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will these 288-pin DDR5 RDIMMs fit the DIMM slots on a Supermicro X14SDW-36CE-SP9F motherboard?

Yes. The kit is verified for that exact board and uses the 288-pin Registered RDIMM form factor the motherboard requires, not UDIMM or SODIMM.

What is the correct population order when installing all four 128 GB modules in the Supermicro X14SDW-36CE-SP9F?

Consult the motherboard manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first for full 512 GB recognition.

Do these Samsung, Micron or Hynix 4Rx4 chips require any firmware updates or periodic re-seating to maintain ECC stability?

No scheduled firmware or re-seating is needed; the registered ECC design corrects single-bit errors on the fly and the modules are covered by a lifetime replacement warranty.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.