Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

NEMIX RAM

NEMIX RAM 64GB (4 x 16GB) DDR4 2666MHz PC4-21300 2Rx8 1.2V 288-PIN ECC UDIMM Unbuffered server RAM

SKU CH-Y4NC-7ZSST

64 GB kit of four 16 GB DDR4 ECC unbuffered DIMMs running at 2666 MHz with CAS 19 at 1.2 V

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS Latency19
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 64 GB total capacity from four 16 GB modules
  • ECC UDIMM detects and corrects single-bit memory errors
  • DDR4 2666 MHz PC4-21300 speed for server workloads
  • Low 1.2 V operating voltage reduces power draw
  • Unbuffered 288-pin DIMM fits compatible DDR4 server boards

64GB DDR4 2666 ECC kit

This 64GB kit contains four 16GB unbuffered UDIMMs rated at DDR4 2666 PC4-21300 with ECC. It targets servers and workstations that require error-correcting memory in the standard 288-pin form factor.

Practical limits of DDR4 2666 ECC UDIMM

The modules run at 1.2V with a CAS latency of 19 and a 2Rx8 organisation. Unbuffered ECC DIMMs of this speed are limited to platforms whose memory controllers support both ECC and unbuffered operation at 2666 MT/s.

Major OEM chips and 288-pin layout

Chips are sourced from Samsung, Micron or Hynix depending on supply. The standard 288-pin edge connector fits any DDR4 UDIMM slot, and the unbuffered design means no register delay, which suits single-socket boards that do not accept registered modules.

Erősségek

  • 64 GB total capacity from four 16 GB modules
  • ECC UDIMM detects and corrects single-bit memory errors
  • DDR4 2666 MHz PC4-21300 speed for server workloads
  • Low 1.2 V operating voltage reduces power draw
  • Unbuffered 288-pin DIMM fits compatible DDR4 server boards

Műszaki adatok

BrandNEMIX RAM
ModelPart#: ME21300-628K4-SM-SYS-5019C-M
Part NumberPart#: ME21300-628K4-SM-SYS-5019C-M
Capacity64GB (4 x 16GB)
SpeedDDR4 2666 (PC4 21300)
CAS Latency19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Kérdések a termékről

Should I pick the 4 x 16 GB kit or a different capacity?

This kit provides 64 GB total across four 16 GB modules, giving you full capacity in four slots while keeping each module at the standard 1.2 V DDR4 voltage.

What does the 2666 MHz rating mean once the memory is installed?

The modules run at DDR4 2666 with CAS latency 19, delivering PC4-21300 bandwidth when the platform supports that speed and the memory controller is configured for it.

How does the ECC UDIMM interface affect what I can use it with?

These are 288-pin unbuffered ECC DIMMs (2Rx8), so they fit standard DDR4 UDIMM slots that accept ECC; they will not work in registered-only or non-ECC-only platforms.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.