Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR4 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 PC4-25600 ECC RDIMM CL22 1.2V 288-pin 1Rx8 memory upgrade

SKU CH-T7WV-10YY5

ECC-registered DDR4 kit delivering 64 GB across four 16 GB modules at 3200 MT/s for ThinkMate Supermicro servers

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64GB total capacity across four 16GB modules for high-density server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth maximises registered memory throughput
  • ECC registered RDIMM design detects and corrects data errors for mission-critical stability
  • 2V operating voltage reduces power draw in dense ThinkMate Supermicro configurations
  • CL22 CAS latency and 1Rx8 organisation optimised for 288-pin server motherboard compatibility

System-specific server memory kit

This 64GB kit contains four 16GB DDR4 3200 registered ECC RDIMMs built for ThinkMate Supermicro SuperServer platforms. Each module runs at 1.20V with CL22 latency and a 1Rx8 organisation. The 288-pin form factor matches the memory slots on the listed 620 and 220 series servers. No heat spreaders are fitted on these modules.

Suited for ThinkMate Supermicro owners

Administrators expanding a ThinkMate Supermicro SuperServer 620P-TR, 620P-TRT, 220P-C9R or 220P-C9RT will find direct compatibility. Builders using other motherboards or workstations should verify registered ECC RDIMM support before purchasing. Systems that require unbuffered memory or non-ECC modules cannot use this kit. Laptops and standard desktop boards are not supported.

Registered ECC RDIMM requirement

The decisive specification is the registered ECC RDIMM format combined with DDR4 3200 speed and 1.20V operation. Only motherboards designed for registered error-correcting modules at this data rate will POST correctly with all four sticks installed. Mixing with unbuffered or non-ECC memory will prevent boot.

Erősségek

  • 64GB total capacity across four 16GB modules for high-density server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth maximises registered memory throughput
  • ECC registered RDIMM design detects and corrects data errors for mission-critical stability
  • 2V operating voltage reduces power draw in dense ThinkMate Supermicro configurations
  • CL22 CAS latency and 1Rx8 organisation optimised for 288-pin server motherboard compatibility

Műszaki adatok

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-618K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Kérdések a termékről

How do I install the 288-pin RDIMM modules in my ThinkMate Supermicro server and which step is commonly missed?

Power down the server, open the chassis, align each module notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 64GB are detected at 3200 MT/s; the step often missed is seating both clips fully on every module.

What maintenance or replacement will the 1Rx8 ECC registered kit need during its service life?

No routine maintenance is required; the modules have no heat spreaders to clean, and ECC corrects single-bit errors transparently — only a failed module would need replacement under the lifetime warranty.

What limit appears first when the 1.2 V CL22 kit runs sustained workloads on a 620P-TR or 220P-C9R platform?

The CAS 22 latency at 3200 MT/s sets the timing ceiling; thermals stay low at 1.2 V without spreaders, so latency — not temperature — is the first bound reached under continuous load.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.