BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277815BTC
Raktáron
NEMIX RAM
NEMIX RAM 64GB DDR5 5200MHz 4 x 16GB Non-ECC UDIMM 1Rx8 1.1V 288-pin
Four 16 GB DDR5 modules deliver 64 GB at 5200 MHz with CAS 44 and 1.1 V operation
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5200 (PC5 41600)
- CAS Latency44
- Voltage1.1V
- ECCNo
- Buffered/RegisteredUnbuffered
- 64 GB total capacity from four 16 GB modules
- DDR5 5200 MHz speed rated at PC5-41600 bandwidth
- Low 1.1 V operating voltage reduces power draw
- Non-ECC unbuffered design fits standard desktop boards
- CAS latency 44 for responsive timing
Capacity and configuration
This kit provides 64GB of DDR5 memory across four 16GB modules. It is built for desktop systems that accept 288-pin unbuffered non-ECC UDIMMs running at 5200MHz. The 1Rx8 organisation suits mainstream platforms that do not require registered or error-correcting memory.
Sustained-load behaviour
Rated at PC5-41600 with a CAS latency of 44, the modules maintain their rated transfer rate during extended workloads. The 1.1V operating voltage supports stable operation without raising the memory controller voltage above standard DDR5 levels. Four ranks populate the typical dual-channel controller evenly.
Thermals and power
Each module draws power at the standard 1.1V DDR5 level, keeping heat output low enough for ordinary case airflow. No additional cooling or high-wattage power supply is required beyond what a typical desktop platform already provides. The unbuffered design adds no extra electrical load on the memory bus.
Erősségek
- 64 GB total capacity from four 16 GB modules
- DDR5 5200 MHz speed rated at PC5-41600 bandwidth
- Low 1.1 V operating voltage reduces power draw
- Non-ECC unbuffered design fits standard desktop boards
- CAS latency 44 for responsive timing
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MD41600-618K4-SM-AS-1015A-MT-01-G2 |
| Part Number | Part#: MD41600-618K4-SM-AS-1015A-MT-01-G2 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | 44 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Kérdések a termékről
How much power does the 1.1 V DDR5 5200 kit draw when the system runs all day?
Each module operates at 1.1 V, the standard DDR5 voltage, so total draw stays within typical desktop limits for a 64 GB kit.
What motherboard slot and CPU memory controller are required for these 288-pin UDIMMs?
You need a board with four DDR5 UDIMM slots and a CPU that supports DDR5 5200 non-ECC unbuffered memory.
Will the 1Rx8 5200 MHz modules run without error on a motherboard that only qualified 2Rx8 sticks?
The kit uses 1Rx8 organisation; most DDR5 boards accept both 1Rx8 and 2Rx8, but you should verify the board’s qualified vendor list.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
