BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280724BTC
Raktáron
NEMIX RAM
NEMIX RAM 8GB DDR4 2933MHz CL21 1.2V UDIMM SuperMicro MBD-C9X299-PGF memory upgrade
8GB DDR4 2933MHz CL21 1.2V UDIMM module built for SuperMicro MBD-C9X299-PGF workstations
- Capacity8GB
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 2933MHz boosts multitasking on SuperMicro MBD-C9X299-PGF
- CL21 latency and 1.2V operation keep system responsive and efficient
- 288-pin UDIMM fits directly into compatible SuperMicro workstation boards
- Non-ECC unbuffered design suits desktop and gaming workloads
- Major OEM chips from Samsung Micron Hynix ensure reliable performance
SuperMicro MBD-C9X299-PGF DDR4 2933MHz upgrade
This 8GB DDR4 UDIMM is built for the SuperMicro MBD-C9X299-PGF motherboard. It targets users who need a single 8GB module to increase system memory without replacing existing sticks. The non-ECC unbuffered design matches the board's desktop and workstation memory slots. It suits professionals expanding a compatible SuperMicro platform.
Straightforward DIMM installation
The 288-pin UDIMM seats in the standard DDR4 slot with no tools required. Align the notch, press until the latches click, and the system recognises the 2933MHz speed at 1.20V automatically. Common issues include mixing ranks or speeds that prevent dual-channel operation, or forgetting to seat the module fully which causes boot failures.
Verify your board and memory layout
Confirm the motherboard model is exactly MBD-C9X299-PGF before ordering. Check how many slots are free and whether the current memory runs at 2933MHz CL21 1Rx8 to avoid timing mismatches. The module is non-ECC unbuffered, so it will not work in slots that require registered or ECC DIMMs. Ensure the BIOS is up to date for full compatibility.
Erősségek
- 8GB DDR4 2933MHz boosts multitasking on SuperMicro MBD-C9X299-PGF
- CL21 latency and 1.2V operation keep system responsive and efficient
- 288-pin UDIMM fits directly into compatible SuperMicro workstation boards
- Non-ECC unbuffered design suits desktop and gaming workloads
- Major OEM chips from Samsung Micron Hynix ensure reliable performance
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-818K1 |
| Capacity | 8GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM |
Kérdések a termékről
How do I verify the module is running at DDR4 2933 CL21 1.20V after installing it in the SuperMicro MBD-C9X299-PGF?
Enter the BIOS on the SuperMicro MBD-C9X299-PGF and confirm the memory frequency shows 2933 MT/s, CAS latency 21, and voltage 1.20V; CPU-Z or dmidecode will report the same values under SPD and timings.
What ships in the package and do I need any extra parts for the SuperMicro MBD-C9X299-PGF?
The box contains one 8GB 288-pin DDR4 UDIMM (1Rx8, non-ECC, unbuffered, no heat spreader); no cables, brackets, or tools are included and none are required for this motherboard.
Which capacity or speed version should I pick for the SuperMicro MBD-C9X299-PGF?
This specific part number MD23400-818K1 is an 8GB DDR4 2933 PC4-23400 module; choose it when you need a single 8GB stick at that exact speed and latency for the listed board.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00283336BTC
Raktáron
