BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
NEMIX RAM
An 8 GB DDR4 UDIMM running at 3200 MHz with CL22 latency and 1.2 V operation
This 8 GB DDR4 UDIMM runs at 3200 MT/s with CL22 timing and 1.20 V operation. It is built as a 1Rx8 non-ECC unbuffered module using major OEM Samsung, Micron or Hynix chips. The part is validated for Dell SNPV0M5RC/8G and AB120718 platforms.
The module fits any standard 288-pin DDR4 desktop DIMM socket and requires no heat spreader or extra clearance. It draws 1.2 V from the motherboard so no auxiliary power or BIOS voltage tuning is needed. Unbuffered design keeps the signal path direct for broad chipset support.
Every stick undergoes extended stress testing under load before shipment to verify long-term reliability. The 1.20 V rating and CL22 latency remain stable during continuous workloads without thermal throttling. Lifetime replacement coverage backs the validated endurance.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Type | 288-pin DDR4 UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
The module operates at DDR4 3200 with CL22 timing at 1.20 V. That combination is within standard JEDEC limits, so sustained throughput stays consistent without timing-related throttling.
There is no heat spreader and no active cooling on the UDIMM. Passive dissipation at 1.20 V keeps surface temperatures low, and the module produces no audible noise.
The board needs a standard 288-pin DDR4 DIMM slot that supplies 1.20 V and accepts non-ECC unbuffered modules.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?