Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Eight green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 5600 128GB 8x16GB CL46 ECC RDIMM GIGABYTE MA34-CP0 memory upgrade

SKU CH-XJ7Q-HZ4XQ

128GB DDR5-5600 ECC registered server memory kit in eight 16GB modules, CL46 at 1.1V, validated for the Gigabyte MA34-CP0 motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Még 24 konfiguráció megtekintése
  • 128 GB total capacity from eight 16 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on GIGABYTE MA34-CP0
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required server DIMM slots without adapters

128GB DDR5 5600 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5 registered DIMMs rated at 5600 MT/s with CL46 latency. It is built for the GIGABYTE MA34-CP0 motherboard and other systems that require 288-pin ECC RDIMM modules. The registered architecture allows full population of every slot at rated capacity.

1.1V operation for registered ECC modules

Each module runs at 1.10V, the standard voltage for DDR5 registered ECC memory, keeping power draw low in typical server workloads. The absence of a heat spreader means airflow across the PCB handles normal thermal load without added bulk. ECC corrects single-bit errors on the fly to maintain data integrity.

Sustained load stability with registered design

The registered buffer reduces electrical load on the memory controller so all eight slots remain stable at full speed during extended use. 1Rx8 organisation delivers consistent throughput for multi-threaded server tasks. Verify your platform's population rules and maximum supported capacity before installation.

Erősségek

  • 128 GB total capacity from eight 16 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on GIGABYTE MA34-CP0
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required server DIMM slots without adapters

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

How do I install the 8x16GB DDR5 5600 RDIMM kit in the GIGABYTE MA34-CP0, and what step is often missed?

Populate all eight slots following the motherboard manual's exact DIMM population order; the step most often missed is verifying the approved sequence before seating the registered ECC modules.

What maintenance or replacement will the 128GB DDR5 ECC RDIMM kit need later?

No routine maintenance is required; if a module fails, replace the faulty 16GB stick with an identical DDR5 5600 CL46 1Rx8 registered ECC part to keep full 128GB capacity.

What limit appears first when the 1.1V DDR5 5600 kit runs sustained workloads on the MA34-CP0?

The memory controller's maximum supported capacity and population rules are the first limit; the board must support eight 1Rx8 registered DIMMs at 5600MHz to sustain full 128GB operation.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.