BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279164BTC
Raktáron
NEMIX RAM
NEMIX RAM DDR5 5600MHz ECC Registered RDIMM 256GB (16x16GB) CL46 1.1V 288-pin Supermicro H13SSF memory upgrade
A 256 GB DDR5 kit of 16 registered ECC RDIMMs running at 5600 MHz CL46 1.1 V for the Supermicro H13SSF motherboard
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB total capacity from 16 matched 16 GB modules
- DDR5 5600 MHz speed rated for PC5-44800 bandwidth
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 1 V operating voltage and CL46 latency match the Supermicro H13SSF memory controller
- 288-pin RDIMM form factor fits the board's required DIMM population rules
Exact-match DDR5-5600 upgrade for Supermicro H13SSF
This 256GB kit supplies sixteen 16GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the H13SSF memory controller expects. It is intended for administrators who need to maximise the board's supported capacity with modules that are recognised at full speed on first boot.
Capacity and headroom for dense workloads
The sixteen 1Rx8 modules deliver 256GB of registered ECC memory, allowing every slot to run fully populated at the rated 5600MT/s data rate. Registered architecture offloads the memory controller so the full complement remains stable, while on-die ECC corrects single-bit errors before they reach production workloads.
Thermals and power in normal operation
Modules operate at the standard DDR5 1.1V without heat spreaders, relying on server chassis airflow for cooling. The registered design reduces electrical load per pin, keeping power draw predictable across all sixteen DIMMs during sustained operation.
Erősségek
- 256 GB total capacity from 16 matched 16 GB modules
- DDR5 5600 MHz speed rated for PC5-44800 bandwidth
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 1 V operating voltage and CL46 latency match the Supermicro H13SSF memory controller
- 288-pin RDIMM form factor fits the board's required DIMM population rules
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Kérdések a termékről
Will the 16x16GB DDR5 5600MHz RDIMM kit run at full speed on a Supermicro H13SSF with older DDR5 modules already installed?
This kit is spec-matched to the H13SSF memory controller for DDR5-5600 CL46 1.1V 1Rx8 registered operation. Mixing with other modules may force the controller to downclock or disable ECC; the board manual lists approved population rules.
How can I confirm the 256GB kit is recognised at full capacity and ECC is active after installation?
Enter BIOS and verify 256GB total with all 16 slots populated at 5600 MT/s; enable ECC scrubbing and check the SMBIOS memory array for 'Multi-bit ECC' status.
Does the 16-module RDIMM kit include heat spreaders or a screwdriver, or must I buy them separately?
The package contains only the 16x16GB 288-pin RDIMM modules; no heat spreaders or tools are included.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00281761BTC
Raktáron
