Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Eight green 288-pin DDR5 RDIMM modules in a clear tray

NEMIX RAM

NEMIX RAM DDR5 6400 256GB 8x32GB ECC RDIMM CL52 1.1V 2Rx4 Supermicro X14QBH+ memory upgrade

SKU CH-7YGP-R8F2S

Eight-module 256 GB DDR5-6400 ECC RDIMM kit with CL52 timing, 1.1 V operation and 2Rx4 registered design, validated for the Supermicro X14QBH+ motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Még 8 konfiguráció megtekintése
  • 256 GB total capacity across eight 32 GB modules for maximum server density
  • DDR5 6400 speed rated at PC5-51200 for high-throughput workloads
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches the platform spec for efficient power draw
  • CL52 CAS latency tuned for the Supermicro X14QBH+ memory controller

Supermicro X14QBH+ DDR5-6400 kit

This 256 GB kit contains eight 32 GB DDR5-6400 ECC registered DIMMs built to the exact timing and voltage the Supermicro X14QBH+ memory controller expects. The modules run at 1.10 V with CL52 latency and a 2Rx4 rank layout so the board recognises the full capacity at rated speed.

Servers needing maximum registered ECC capacity

Ideal for administrators populating every slot on a Supermicro X14QBH+ with validated registered ECC memory for production workloads. Not suited for systems that require unbuffered UDIMMs, SODIMM form factors, or lower-density modules than the 32 GB per DIMM this kit provides.

Verify DIMM population rules before ordering

Consult the motherboard manual for approved slot-filling order, maximum supported capacity per channel, and any BIOS version requirements. The kit uses 288-pin RDIMMs only; confirm your platform accepts registered DDR5 and that the 2Rx4 organisation matches its qualified-vendor list.

Erősségek

  • 256 GB total capacity across eight 32 GB modules for maximum server density
  • DDR5 6400 speed rated at PC5-51200 for high-throughput workloads
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches the platform spec for efficient power draw
  • CL52 CAS latency tuned for the Supermicro X14QBH+ memory controller

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will this kit run at DDR5 6400 in a Supermicro X14QBH+ without manual timing changes?

The kit is spec-matched to the X14QBH+ memory controller with 1.1 V, CL52 and 2Rx4 registered ECC, so it is recognised at full 256 GB capacity and runs at its rated DDR5 6400 speed without extra configuration.

Can I mix these 2Rx4 RDIMMs with 1Rx4 or 2Rx8 modules already installed in the same board?

Registered ECC RDIMMs of different rank or organisation should not be combined in the same channel; the X14QBH+ population rules require identical 2Rx4 modules per channel for stable operation at DDR5 6400.

How do I confirm the system is using all 256 GB at DDR5 6400 with ECC active after installation?

Enter BIOS or use a tool such as dmidecode to verify total memory shows 256 GB, speed reads 6400 MT/s, and ECC status reports enabled for every DIMM slot.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.