Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM MR51200-9624K4 384GB (4 x 96GB) DDR5 6400 CL52 ECC Registered RDIMM memory upgrade

SKU CH-2Q2B-BYJJZ

A 384GB DDR5 server memory kit of four 96GB registered ECC RDIMMs running at 6400MHz with CL52 latency and 1.1V operation, validated for the ASRock Rack GNRAPD12DNO motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Még 4 konfiguráció megtekintése
  • 384 GB capacity across four 96 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation matches the platform's memory controller specification exactly
  • Verified fit for ASRock Rack GNRAPD12DNO motherboard with 288-pin RDIMM form factor

Capacity and purpose

This 384GB kit contains four 96GB DDR5 Registered ECC RDIMM modules rated at 6400MHz with CL52 latency and 1.1V operation. It is built for servers and workstations that require maximum memory density with error correction and registered buffering for stability under full population.

Who this suits

The kit is designed for the ASRock Rack GNRAPD12DNO motherboard and matches its DDR5 6400MHz PC5-51200 2Rx4 specification exactly. It is not for systems that accept only unbuffered UDIMM or SODIMM modules, nor for platforms limited to lower DDR5 speeds or different rank configurations.

Build integration

Each module uses the 288-pin RDIMM form factor and draws 1.1V, so the motherboard must support Registered ECC DDR5 at this voltage and population rule. The registered architecture offloads the memory controller, allowing all four slots to run at rated capacity while ECC corrects single-bit errors without interrupting operation.

Erősségek

  • 384 GB capacity across four 96 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation matches the platform's memory controller specification exactly
  • Verified fit for ASRock Rack GNRAPD12DNO motherboard with 288-pin RDIMM form factor

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What motherboard is required to install this 384GB DDR5 6400 CL52 ECC RDIMM kit?

The kit is verified for the ASRock Rack GNRAPD12DNO motherboard, which accepts 288-pin DDR5 RDIMM modules at 1.1V with 2Rx4 organisation.

Will this 2Rx4 Registered DDR5 6400 kit run correctly with existing 1Rx4 DDR5 RDIMMs in the same server?

Mixing ranks can change the memory controller's addressing and timing; the board manual specifies approved population rules for full-speed operation with 2Rx4 modules.

How do I confirm the kit is running at DDR5 6400 CL52 with ECC active after installation?

Check the BIOS memory information or OS tools such as dmidecode to verify 6400 MT/s, CL52 timings, 1.1V and ECC enabled across all four 96GB DIMMs.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.