NTI Corporation
NTI Cloning Kit for M.2 NVMe SSD — 10 Gbps enclosure, USB 3.0/2.0 adapter, Echo 7 software
Complete M.2 NVMe SSD cloning kit with 10 Gbps aluminum enclosure, USB 3.0/2.0 adapter and Echo 7 software for drive upgrades and backup
- ColorBlack
- TypeHDD/SSD
- MaterialAluminum
- External InterfaceHard Drive Enclosure
- HDD Count SupportedSingle HDD
- Number of Bay1
- Complete cloning kit with Echo 7 software, enclosure and cable included
- Echo 7 software supports dynamic resize, 1-to-1, user-defined and partition cloning
- Aluminum M.2 NVMe enclosure transfers data at up to 10 Gbps
- After cloning, enclosure becomes a durable external backup drive for the original SSD
- Three-step process: install SSD, connect via USB 3.0 or 2.0, run cloning software
Complete M.2 NVMe SSD cloning kit
The NTI Cloning Kit provides everything needed to upgrade an M.2 NVMe SSD in three steps. It includes an aluminum enclosure, a USB cable with Type-C and 3.0/2.0 adapters, and NTI Echo 7 cloning software delivered via a download card. The kit suits users who want a straightforward drive migration without separate purchases.
Aluminum enclosure runs without a fan
The single-bay case is built from lightweight aluminum alloy that passively dissipates heat during data transfers. It connects through a USB interface rated for up to 10 Gbps, drawing power directly from the host port so no external supply is required. Operation stays silent because there are no moving parts inside the enclosure.
Echo 7 software handles dynamic partition resizing
The included cloning application supports Dynamic Resize, 1-to-1 Cloning, User-Defined Cloning and Partition Cloning. Dynamic Resize automatically adjusts partitions to fit a smaller or larger target drive, which is the default and recommended method. Buyers who need sector-level forensic imaging or hardware write-blocking should look elsewhere.
Erősségek
- Complete cloning kit with Echo 7 software, enclosure and cable included
- Echo 7 software supports dynamic resize, 1-to-1, user-defined and partition cloning
- Aluminum M.2 NVMe enclosure transfers data at up to 10 Gbps
- After cloning, enclosure becomes a durable external backup drive for the original SSD
- Three-step process: install SSD, connect via USB 3.0 or 2.0, run cloning software
Műszaki adatok
| Color | Black |
|---|---|
| Type | HDD/SSD |
| Material | Aluminum |
| External Interface | Hard Drive Enclosure |
| HDD Count Supported | Single HDD |
| Number of Bay | 1 |
Kérdések a termékről
How do I install the M.2 NVMe SSD into the aluminum enclosure, and which step is commonly missed?
Insert the SSD at an angle into the M.2 slot, secure it with the screw, then slide the cover on; the step often missed is tightening that retention screw before closing the case.
What maintenance or replacement will the kit need after the initial clone?
No hardware maintenance is required; the enclosure can stay in use as an external backup drive, and the Echo 7 software can be re-downloaded anytime for future cloning jobs.
What is the first performance limit reached during sustained transfers with the 10 Gbps enclosure?
The USB 3.0/2.0 adapter and cable set the practical ceiling; sustained throughput will be limited by the host port's 3.0 or 2.0 capability rather than the enclosure's 10 Gbps rating.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Lenovo
Lenovo 4XB0F28690 ThinkServer RAID 110i RAID 5 Upgrade Key
66,99 USD73,99 USD−9%
0.00084933BTC
Raktáron
