OEM Industries
OEM Industries AFB0412MB 40mm 12V 0.13A 2-Pin Fan
A 40 mm ball-bearing fan running at 6000 RPM with 28.5 dBA noise on a 12 V 2-pin connector
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeBall
- Power Connector2 Pin
- LEDNo
- Compact 40 mm frame fits tight builds
- 6000 RPM airflow moves heat quickly
- 5 dBA noise stays low under load
- Ball bearing design extends service life
- 12 V 0.13 A draw keeps power use minimal
Compact 40 mm cooling fan for tight builds
This 40 mm square fan measures 15 mm thick and runs on 12 V at 0.13 A through a two-pin connector. The ball bearing design targets system integrators who need a slim airflow source for small-form-factor chassis or replacement cooling on legacy heatsinks.
Steady 6000 RPM airflow with 28.5 dBA noise
At the rated 6000 RPM the fan delivers continuous airflow rather than a brief burst, and the ball bearing maintains consistent speed during extended operation. The 28.5 dBA acoustic level stays predictable under sustained load because the bearing friction does not increase as the assembly warms.
Black frame with two-wire power and standard
The black plastic frame uses the industry-standard 40 mm screw pattern so it drops into existing fan mounts without adapters. The two-pin lead supplies power only, so speed control depends on the motherboard or controller varying the voltage rather than a PWM signal.
Erősségek
- Compact 40 mm frame fits tight builds
- 6000 RPM airflow moves heat quickly
- 5 dBA noise stays low under load
- Ball bearing design extends service life
- 12 V 0.13 A draw keeps power use minimal
Műszaki adatok
| Model | AFB0412MB |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| LED | No |
Kérdések a termékről
How loud is the AFB0412MB when it runs at 6000 RPM all day?
The fan produces 28.5 dBA at full speed, which is a quiet hum suitable for continuous operation in a desktop chassis.
What power connector does the AFB0412MB need from my system?
It uses a standard 2-pin 12 V header drawing 0.13 A, so any motherboard or fan controller with a 2-pin 12 V output will power it.
Will this 40 mm Delta fan fit the mounting holes on my older 40 mm heatsink?
Yes — the frame measures 40 × 40 × 15 mm, matching the industry-standard 40 mm mounting pattern used on legacy coolers.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001036BTC
Raktáron