OWC 2R4D42R816GB 16GB DDR4 2400MHz CL17 ECC Registered RDIMM memory upgrade
- 16GB
- 288-Pin DDR4 ECC RD…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
OWC
16GB DDR4 2400MHz ECC registered RDIMM for compatible Supermicro server and workstation motherboards
Capacity 16GB
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
This 16GB DDR4 registered DIMM is built for Supermicro X10DAX, X10DDW-i, X10DDW-iN, X10DGO and X10DGO-T motherboards. It targets administrators who need error-correcting memory in workstations, servers or NAS appliances. The module is not compatible with standard desktop platforms and must not be mixed with unbuffered DIMMs.
The single specification that decides fit is the registered ECC design running at PC4-19200 CL17 on a 288-pin interface. Only systems that explicitly support registered error-correcting modules at this speed and latency will accept the upgrade.
Operating at 1.2V without a heat spreader, the module draws minimal power and runs quietly in normal server chassis airflow. Passive cooling is sufficient for typical workloads on the listed Supermicro boards.
| Brand | OWC |
|---|---|
| Part Number | 2R4D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X10DAX Supermicro Motherboard X10DDW-i Supermicro Motherboard X10DDW-iN Supermicro Motherboard X10DGO Supermicro Motherboard X10DGO-T |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The module runs at DDR4 2400 (PC4-19200) with CL17 latency at 1.2V, delivering the rated throughput on the supported Supermicro X10DAX, X10DDW-i, X10DDW-iN, X10DGO and X10DGO-T boards.
ECC Registered operation provides error correction and signal buffering for server and workstation workloads; it cannot be mixed with unbuffered memory and is not compatible with standard desktop platforms.
Yes, the 288-pin DDR4 RDIMM form factor matches the memory slots on the listed Supermicro X10 series motherboards and requires no heat spreader clearance.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?