Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 ECC RDIMM memory upgrade

SKU CH-191G-DGTYR

32 GB kit of four 8 GB DDR3-1333 ECC registered DIMMs for Supermicro X8QB6 and X8QBE motherboards

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity from four 8 GB modules
  • DDR3 1333 MHz CL9 speed for responsive server workloads
  • ECC registered design protects data integrity in workstations
  • 5 V operation matches Supermicro X8QB6 and X8QBE specifications
  • Direct replacement for six Supermicro part numbers including MEMDR380LCL01ER13

Capacity and configuration

This kit provides 32GB of DDR3 memory in a matched set of four 8GB modules. Each module is a 240-pin ECC registered DIMM rated at 1333MHz with CL9 latency and 1.5V operation. It is built for Supermicro X8QB6 and X8QBE series motherboards.

Headroom and limits

The 32GB total capacity suits virtualisation hosts, database servers and NAS appliances that need ECC integrity. Registered signalling adds electrical load, so the memory controller must support registered DIMMs; unbuffered consumer boards will not accept these modules. The DDR3 1333 speed caps bandwidth at PC3-10600.

Upgrade context

It replaces Supermicro part numbers MEMDR380LCL01ER13, MEMDR380LHL01ER13, MEMDR380LHL03ER13, MEMDR380LHV01ER13, MEMDR380LSL02ER13 and MEMDR380LSL06ER13. The jump is worthwhile when extending the life of existing X8QB6 or X8QBE infrastructure or when building a replacement server on a budget. Buyers who need unbuffered memory or a faster DDR generation cannot use this kit.

Erősségek

  • 32 GB total capacity from four 8 GB modules
  • DDR3 1333 MHz CL9 speed for responsive server workloads
  • ECC registered design protects data integrity in workstations
  • 5 V operation matches Supermicro X8QB6 and X8QBE specifications
  • Direct replacement for six Supermicro part numbers including MEMDR380LCL01ER13

Műszaki adatok

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8QB6 Series
Supermicro Motherboard X8QBE Series

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will the 1333 MHz DDR3 ECC RDIMM modules work alongside existing DDR3 ECC RDIMM modules in a Supermicro X8QB6?

These 1333 MHz CL9 1.5V 2Rx4 registered DIMMs are designed for the X8QB6 and X8QBE series. The system will run all installed modules at the speed and timings supported by the slowest module present.

How can I confirm the 32 GB kit is detected and running with ECC active after installation?

Enter the system BIOS or UEFI on boot and verify the total memory shows 32 GB across four slots at 1333 MHz with ECC status reported as enabled or active.

What is included in the 32 GB kit and are any extra parts needed for installation?

The kit contains four 8 GB 240-pin DDR3 ECC registered DIMMs. No additional components are required; install directly into compatible DIMM slots on the supported Supermicro motherboards.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.