Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

OWC

OWC 4U2D21R8002P 2GB (2x1GB) DDR2 533 desktop RAM

SKU CH-019X-16QV6

Dual-channel kit of two 1GB DDR2 533 modules at 1.8V with CL4 latency for desktop upgrades

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Voltage1.8V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB (2 x 1GB)

  • 2GB dual-channel kit expands multitasking headroom
  • DDR2 533 PC2-4200 CL4 timing matches legacy platform specs
  • JEDEC and ROHS compliant for warranty-safe installs
  • 8V unbuffered non-ECC design fits standard desktop slots
  • 240-pin modules tested in-house for reliable operation

DDR2 533 dual-channel kit

This OWC kit provides 2GB of desktop memory as two matched 1GB modules. They run at DDR2 533 speed with a CL4 latency and 1.8V operation. The unbuffered, non-ECC DIMMs use the standard 240-pin form factor. A black PCB completes the specification.

Suits older desktops needing a matched pair

The dual-channel configuration benefits systems with two available slots that support PC2-4200 modules. Builders repairing legacy workstations or upgrading basic office machines will find the JEDEC-standard parts straightforward to install. Systems requiring ECC, registered DIMMs, higher speeds or larger single modules should select a different product.

240-pin DDR2 533 UDIMM decides fit

The 240-pin unbuffered DDR2 533 interface is the single specification that determines whether this kit fits a motherboard. Only boards designed for PC2-4200 non-ECC memory at 1.8V will accept these modules. Verify the manual before purchase.

Erősségek

  • 2GB dual-channel kit expands multitasking headroom
  • DDR2 533 PC2-4200 CL4 timing matches legacy platform specs
  • JEDEC and ROHS compliant for warranty-safe installs
  • 8V unbuffered non-ECC design fits standard desktop slots
  • 240-pin modules tested in-house for reliable operation

Műszaki adatok

BrandOWC
Part Number4U2D21R8002P
Capacity2GB (2 x 1GB)
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

A modell további verziói

4 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will these modules work in a motherboard that only has PC2-4200 slots?

Yes, the kit is rated at PC2-4200 and runs at 533 MHz, so it matches that slot specification exactly.

Do I need to install both sticks together for the system to boot?

The kit is sold as a matched pair for dual-channel operation, but each 1 GB module can be used individually if your board only has one free slot.

Is any special voltage setting required in the BIOS?

The modules operate at the standard 1.8 V for DDR2, so most desktop BIOSes will configure them automatically without manual adjustment.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.