Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

OWC

OWC 64GB (4x16GB) DDR3 1333 CL9 ECC Registered RDIMM memory upgrade

SKU CH-9WMM-CRWQ5

Adds 64 GB of DDR3-1333 ECC registered memory across four 16 GB modules for compatible Supermicro SuperServer systems

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • ECC registered design protects data integrity in servers
  • 64GB kit with four 16GB modules expands capacity
  • DDR3 1333 CL9 speed matches system specifications
  • 5V operation meets JEDEC standards for compatibility
  • Validated for Supermicro SuperServer 1026 2026 6016 series

OWC 64GB DDR3 ECC RDIMM kit

This OWC kit provides 64GB of DDR3 1333 memory across four 16GB registered DIMMs. Each module runs at 1.5V with CL9 latency and 2Rx4 organisation. The 240-pin form factor fits the listed Supermicro SuperServer platforms. ECC and registered operation protect data integrity in server workloads.

For Supermicro 1026 2026 6016 servers

The modules are validated for Supermicro SuperServer 1026GT 1026T 1026TT 2026TT and 6016GT series. Systems that require unbuffered memory or a different pin count cannot use this kit. Builders upgrading consumer desktops or workstations without registered DIMM support should not purchase this product.

Registered ECC DDR3 at 1333 MT/s

The decisive specification is the registered ECC DDR3 1333 interface. Only motherboards designed for 240-pin registered DDR3 DIMMs can accept these modules. Verify the server manual specifies registered ECC DDR3 before ordering.

Erősségek

  • ECC registered design protects data integrity in servers
  • 64GB kit with four 16GB modules expands capacity
  • DDR3 1333 CL9 speed matches system specifications
  • 5V operation meets JEDEC standards for compatibility
  • Validated for Supermicro SuperServer 1026 2026 6016 series

Műszaki adatok

BrandOWC
Part Number1R3D32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1026GT Series
Supermicro SuperServer 1026T Series
Supermicro SuperServer 1026TT Series
Supermicro SuperServer 2026TT Series
Supermicro SuperServer 6016GT Series

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Does the DDR3 1333 PC3-10600 interface limit bandwidth to 10600 MT/s in these Supermicro servers?

Yes, the modules run at DDR3 1333 (PC3-10600) with CL9 timing, so peak transfer rate is capped at the PC3-10600 specification when installed in the listed Supermicro SuperServer 1026GT, 1026T, 1026TT, 2026TT or 6016GT series.

What physical slot and form factor do the 240-pin 2Rx4 RDIMMs require?

Each 16 GB module uses a standard 240-pin DDR3 DIMM form factor; the kit provides four 2Rx4 registered DIMMs that occupy four DIMM slots on the compatible Supermicro server motherboards.

How are the four 16 GB sticks installed, and what common mistake should be avoided?

Populate all four modules in the correct channel order for the specific Supermicro model and do not mix these registered ECC DIMMs with any unbuffered memory, as the system will not boot with mixed types.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.