Phanteks PH-F140M25R_G2_DWT01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Phanteks
Three 140mm ARGB fans with daisy-chain frames and single-cable Linq6 connectors deliver up to 100.07 CFM at 40.95 dBA for radiator or case cooling
Fan Size 140mm
Style Reversed
Model M25 Gen2
Option Triple Fans
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
This triple pack supplies three 140 mm case fans with reversed blades, hydro bearings and addressable D-RGB lighting. Builders who want coordinated airflow and lighting across a radiator or case interior can install all three from a single box. The fans are new and include mounting screws, extension cables and screw covers for a tidy finish.
Each fan spins between 350 and 1800 RPM and delivers up to 100.07 CFM of airflow with a static pressure of 2.04 mmH2O. Maximum noise reaches 40.95 dBA at full speed, while the PWM 4-pin connector lets the motherboard scale speed down for quieter operation. Power and lighting signals share a single Linq6 cable to reduce wiring clutter.
The blades are designed for reverse airflow, meaning they pull air through the frame in the opposite direction to standard fans. This orientation suits radiators or heatsinks where pull configuration is preferred. Buyers who need conventional push-direction fans should choose the regular M25 Gen2 model instead.
| Brand | Phanteks |
|---|---|
| Model | M25-140 Gen2 Reversed |
| Part Number | PH-F140M25R_G2_DBK01_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 350-1800 +/- 10% RPM |
| Air Flow | 100.07 CFM Max |
| Air Pressure | 2.04 mmH2O |
| Noise Level | 40.95 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / Black Fan Frame |
| LED | DRGB |
| Dimensions | 140 x 140 x 25 mm |
| Package Contents | M25-140 Gen2 Reversed Fan: 3x Fan Screws: 14x 500mm Linq6 Extension Cable: 2x 500mm Linq6 M/B Adapter: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 4x Installation Guide: 1x |
| Szállítási súly | 0.93 kg |
| Csomagméret | 457 × 165 × 51 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Interlock the fans using the unified frame, link them with the two 500 mm Linq6 extension cables, then plug the single Linq6 motherboard adapter into a 4-pin PWM header for both power and DRGB control.
The hydro bearing design is sealed for the life of the fan; no lubrication or bearing service is expected under normal operation.
The 40.95 dBA figure is measured at the top speed of 1800 RPM; running the fan slower via PWM reduces the noise proportionally.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?