Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two black DDR4 UDIMM sticks in a matched 16GB kit

PUSKILL

PUSKILL 16GB (2x8GB) DDR4 2666MHz CL19 1.2V Black UDIMM desktop RAM

SKU CH-DS4Y-DCFR7

A 16GB dual-channel DDR4 kit running at 2666MHz CL19 for faster desktop responsiveness

  • CAS LatencyCL19
  • Timing19-19-19-43
  • ChipsetOriginal particles
  • Capacity16GB (2 x 8GB)
  • ECCNo
  • ColorBlack

option 2x8GB 2666MHz CL19 1.2V

  • 16 GB dual-channel kit keeps everyday workloads smooth
  • 2666 MHz DDR4 speed with CL19 timing for responsive performance
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM design fits standard desktop motherboards
  • Two matched 8 GB modules enable full dual-channel bandwidth

16GB DDR4 Kit for Desktop Upgrades

This PUSKILL kit provides 16GB of DDR4 memory across two matched 8GB UDIMM modules. It targets desktop users who want a straightforward capacity increase for everyday office work, heavy browser use and light gaming. The dual-channel configuration doubles usable bandwidth compared with a single stick. Laptop or mini-PC owners cannot use these 288-pin modules.

Check Motherboard Slots and DDR4 Support

Verify that your desktop motherboard has free 288-pin DDR4 slots and accepts non-ECC unbuffered memory. The kit runs at 2666MHz with CL19-19-19-43 timings at 1.2V and is backward compatible with 2400MHz and 2133MHz systems without BIOS changes. No XMP profile is required. Systems limited to 260-pin SO-DIMMs or proprietary form factors will not accept these sticks.

Standard Voltage Thermals and Quiet Operation

Operating at the standard 1.2V DDR4 voltage, the modules generate modest heat during typical workloads and require no active cooling beyond normal case airflow. With no fans or moving parts the kit adds no audible noise. Power draw stays within the normal envelope for 2666MHz DDR4, so no special power-supply consideration is needed for this upgrade.

Erősségek

  • 16 GB dual-channel kit keeps everyday workloads smooth
  • 2666 MHz DDR4 speed with CL19 timing for responsive performance
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM design fits standard desktop motherboards
  • Two matched 8 GB modules enable full dual-channel bandwidth

Műszaki adatok

CAS LatencyCL19
Timing19-19-19-43
ChipsetOriginal particles
Capacity16GB (2 x 8GB)
ECCNo
ColorBlack
BrandPUSKILL
ModelDDR4

A modell további verziói

1 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will these modules fit in a laptop or small-form-factor PC?

No. These are 288-pin UDIMMs built for desktop motherboards only. Laptops and many mini PCs use 260-pin SO-DIMMs, which are physically different and not interchangeable.

Do I need to enable XMP or change BIOS settings to reach the rated speed?

The kit is designed to run at 2666 MHz CL19 straight out of the box with no manual tuning required. If your platform only supports 2400 MHz or 2133 MHz, the modules will simply down-clock to the highest speed the board allows.

What do I need on my motherboard to get the dual-channel benefit?

You need two free DDR4 DIMM slots. Installing the matched 8 GB pair in the correct slots — usually the same-coloured pair — activates dual-channel mode, doubling memory bandwidth over a single stick.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.