NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
SAMSUNG
32 GB DDR4 2133 ECC load-reduced server memory module with CL15 timing at 1.2 V
This SAMSUNG M386A4G40DM0-CPB module delivers 32 GB of DDR4 2133 memory with ECC and load-reduced buffering. It targets enterprise servers that require high-capacity DIMMs and data-integrity protection for mission-critical applications. The 288-pin form factor fits standard DDR4 server slots.
The module runs at 1.20 V with 15-15-15 timings and CAS latency 15, keeping power draw and heat low during continuous multi-threaded loads. Load-reduced architecture reduces electrical loading on the memory bus, allowing larger memory configurations to remain stable over extended periods. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute jobs.
The DIMM installs like any 288-pin DDR4 module, but the motherboard must explicitly support LRDIMM technology and 4Rx4 rank organisation. Mixing LRDIMMs with registered or unbuffered DIMMs will prevent the system from posting. Verify that the server BIOS recognises load-reduced modules before populating all slots.
| Brand | SAMSUNG |
|---|---|
| Model | M386A4G40DM0-CPB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Szállítási súly | 0.04 kg |
| Csomagméret | 169 × 52 × 15 mm |
The module operates at 1.20 volts, the standard DDR4 voltage, so power draw per stick stays low and heat output remains modest even under sustained load.
It fits a 288-pin DDR4 slot and needs a platform that supports Load Reduced DIMMs with ECC and 4Rx4 organisation.
Mixing LRDIMMs with standard registered DIMMs is not supported; all slots must use the same memory technology for the system to operate correctly.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?