Seagate ST2000NM000A 2TB 7200RPM 256MB 512n SATA 3.5" internal hard drive
- SATA 6.0Gb/s
- 2TB
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Seagate
3 TB enterprise SATA hard drive with 7200 RPM and 256 MB cache, rated for 550 TB annual workload and 2 million hour MTBF
The Seagate Exos 7E8 ST3000NM000A is a 3TB internal hard drive built for 24×7 enterprise workloads. It uses conventional magnetic recording technology to deliver reliable capacity for data centre bulk storage. The 7200 RPM spindle and 256MB cache support consistent throughput in replicated or RAID arrays. It is designed for IT professionals who need dependable high-capacity storage.
The drive connects through a standard SATA 6.0Gb/s interface and uses the 512n sector format for broad compatibility with existing controllers and backplanes. This connector choice means it fits directly into typical server drive bays and RAID enclosures without adapters. The 512n format simplifies deployment in legacy and current operating systems alike. No special mounting hardware or protocol translation is required.
The Exos 7E8 is rated for 550 TB of data transferred per year, a figure ten times higher than typical desktop drives. This workload rating is the single specification that determines whether the drive matches a 24×7 bulk data environment. Buyers who need sustained write performance beyond this annualised limit should consider a different drive class. The 2 million hour MTBF rating further qualifies it for continuous operation.
| Brand | Seagate |
|---|---|
| Series | Exos 7E8 |
| Model | ST3000NM000A |
| Interface | SATA 6.0Gb/s |
| Capacity | 3TB |
| RPM | 7200 RPM |
| Cache | 256MB |
| Features | Hard Drive |
| Szállítási súly | 0.91 kg |
| Csomagméret | 178 × 102 × 51 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The SATA 6.0Gb/s interface caps real-world throughput at roughly 600 MB/s, so sustained reads and writes from the 7200 RPM platters will not exceed that ceiling.
It fits a standard 3.5-inch drive bay with SATA data and power connectors, using the typical four side or bottom screw holes for secure mounting.
Connect both the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise and format the 512n volume in the OS — skipping the format leaves the drive invisible.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?