SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Seagate
A 600GB 3.5" SAS hard drive spinning at 10000 RPM with 16MB cache for server workloads
This Seagate Cheetah NS.2 drive delivers 600GB of storage on a SAS 6Gb/s interface. The 10000 RPM spindle speed and 16MB cache support fast data access for demanding workloads. It uses a standard 3.5-inch form factor for server drive bays. The bare-drive packaging suits system integrators and replacement scenarios.
This drive is built for Tier 1 server environments where consistent performance matters. Buyers without a SAS host bus adapter or backplane cannot install it, as the interface is not compatible with standard desktop connectors. It is also not suited for users who need higher capacities for archival storage or who require a consumer warranty bundle.
The average seek time is 2.98ms, a key indicator of how quickly the drive locates data under heavy request queues. This figure, combined with 4.4ms average latency, helps determine if the drive meets your application's response-time requirements. If your workload demands lower latency, you would need to evaluate alternative drive classes.
| Brand | Seagate |
|---|---|
| Series | Cheetah NS.2 |
| Model | ST3600002SS |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 600GB |
| RPM | 10000 RPM |
| Cache | 16MB |
| Average Seek Time | 2.98ms |
| Average Write Time | 3.8ms |
| Average Latency | 4.4ms |
| Features | Seagate Cheetah ST3600002SS NS.2 drives reduce costs for 3.5-inch Tier 1 solutions, helping to sustain business. It is 600 GB of capacity, which is the highest capacity of any Tier 1 mission critical drive. This higher capacity reduces storage costs per GB and increases capacity per watt. The drive also includes Seagate PowerTrim technology, which dynamically optimizes drive power consumption at all levels of activity. |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Szállítási súly | 1.13 kg |
| Csomagméret | 191 × 165 × 76 mm |
Yes, the drive uses a SAS 6Gb/s interface and requires a compatible controller or backplane to operate.
It will operate alongside other SAS drives on the same bus, though the overall throughput is limited by the slowest device on that controller.
Check that the drive reports 600GB capacity, 10000 RPM and 16MB cache in the RAID controller BIOS or OS disk utility, and confirm SMART health is at least 90%.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?