Seagate ST3300657SS 300GB 15000 RPM 16MB SAS 6Gb/s 3.5" internal hard drive
- Bare Drive
- SAS 6Gb/s
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Seagate
A 600GB enterprise hard drive spinning at 15000 RPM with a SAS 6Gb/s interface and 16MB cache for high-reliability storage
The Seagate Cheetah 15K.7 ST3600057SS is a new 3.5-inch enterprise hard drive built for high-throughput server and storage arrays. It spins at 15000 RPM on a SAS 6Gb/s interface with 16MB cache, delivering sustained transfer rates up to 204MB/s and an average seek time of 3.4ms.
This drive targets environments that demand the highest 3.5-inch reliability and low latency for random I/O, such as database, email and NAS deployments. Buyers needing larger capacity per spindle or lower power draw per terabyte should consider alternatives.
The dual-port SAS 6Gb/s connection and 15000 RPM rotation speed are the decisive specifications; they determine controller compatibility and the sustained throughput ceiling for mission-critical applications.
| Brand | Seagate |
|---|---|
| Series | Cheetah 15K.7 |
| Model | ST3600057SS |
| Packaging | Bare Drive |
| Capacity | 600GB |
| RPM | 15000 RPM |
| Interface | SAS 6Gb/s |
| Cache | 16MB |
| Average Seek Time | 3.4ms |
| Average Write Time | 3.9ms |
| Average Latency | 2ms |
| Form Factor | 3.5" |
| Height (maximum) | 25.40mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 146.52mm |
| Features | Key Advantages - Third-generation perpendicular recording delivers up to 600GB - Unprecedented performance with sustained data rate of up to 204MB/s - a 16 percent increase over last generation - Industry's highest 3.5-inch drive reliability at 1.6-million-hour MTBF - Seagate PowerTrim technology provides a 62 percent improvement in GBs/W at idle over typical 3.5-inch hard drives - Read/write advances deliver nonrecoverable error rate of 1x10E16 - Available in 4Gb/s FC or 6Gb/s SAS interfaces (supports SAS 2.0 feature set) - TCG-compliant Self-Encrypting Drive (SED) option cuts IT dr |
| Usage | For Enterprise Storage |
| Szállítási súly | 0.73 kg |
| Csomagméret | 146 × 102 × 20 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The SAS 6Gb/s interface supports up to 6 Gb/s, while the drive itself delivers a sustained data rate of up to 204MB/s.
Yes, the 25.40 mm height matches the standard 3.5-inch form factor and fits typical enterprise drive bays.
Mount the drive using the 3.5-inch screw holes, connect the SAS data and power cables, then configure the drive in the RAID controller BIOS so the operating system can see it.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?