SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Seagate
Enterprise 4TB drive with SAS 12Gb/s interface, 7200 RPM and 128MB cache for high-capacity storage
The Seagate ST4000NM0014 is a 4TB enterprise-class hard drive built for high-capacity density RAID arrays and bulk-data applications. It uses a SAS 12Gb/s interface and spins at 7200 RPM with a 128MB cache. The 3.5-inch form factor fits standard enterprise drive bays and backplanes.
As a mechanical enterprise drive, it generates typical operational heat and audible seek noise under sustained workloads. The 7200 RPM spindle speed and SAS interface draw consistent power during random and sequential access patterns. System integrators should provide adequate airflow in multi-drive enclosures to maintain reliable operating temperatures.
The drive ships as a bare unit without cables, mounting brackets, or software utilities in the box. Deployment requires a compatible SAS controller or backplane and appropriate cabling sourced separately. RAID configuration and management depend entirely on the host controller or storage appliance firmware used in the target system.
| Brand | Seagate |
|---|---|
| Series | Enterprise Capacity 3.5 |
| Model | ST4000NM0014 |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 4TB |
| RPM | 7200 RPM |
| Cache | 128MB |
| Average Latency | 4.16ms |
| Features | Capacity-Optimized Enterprise Hard Drive for Bulk-Data Applications - Highest-capacity large form factor enterprise drive - 50% more capacity over last generation with up to 6TB - for demanding data growth - Fastest high-capacity HDD with best-in-class random and sequential read/write performance - Eighth-generation drive technology for reliable access to bulk storage of unstructured data - Both 12Gb/s SAS and SATA 6Gb/s interfaces for easy integration into replicated and RAID storage systems - Enhanced error correction, super parity and end-to-end SAS-based data integrity for accura |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 147.00mm |
| Szállítási súly | 1.36 kg |
| Csomagméret | 178 × 127 × 25 mm |
Mount the drive using standard 3.5" screw holes, connect the SAS data and power cables, then configure the drive in your RAID controller BIOS before the OS sees it.
Plan for eventual replacement after the rated workload limit; monitor SMART reallocated-sector counts and run periodic surface scans to catch degradation early.
The 128MB cache fills quickly under heavy streaming writes, so sustained throughput drops to the native media transfer rate once the buffer is saturated.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?