Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Right-angled SAS 29-pin to SATA 22-pin adapter, compact black connectors

SMUGDESK

SMUGDESK 90 Degree SFF-8482 29Pin SAS to SATA 22Pin Adapter

SKU CH-77NA-H64R3

A 90-degree angled adapter converts a 29-pin SAS 8482 port to a 22-pin SATA interface for tight server chassis

  • 90-degree angled design saves space in tight chassis
  • Converts SFF-8482 29-pin SAS to SATA 22-pin for broad compatibility
  • Ideal for RAID array expansion and server storage upgrades
  • Stable signal transmission supports high-speed SAS/SATA hard drive operation
  • Compact plug-and-play structure installs easily without extra drivers

Compact SAS-to-SATA adapter for tight builds

This 90-degree angled adapter converts an SFF-8482 29Pin SAS interface to a standard SATA 22Pin connection. It enables direct attachment of SAS hard drives to SATA-compatible motherboards or RAID controllers. The right-angle form factor is designed specifically for space-constrained chassis, servers and NAS enclosures where straight connectors would obstruct airflow or adjacent components.

Passive design adds no heat or noise

The adapter operates without active cooling, drawing no additional power and generating zero acoustic noise. Signal integrity is maintained through high-quality connectors rated for stable high-speed SAS and SATA drive operation. Because it is a purely passive electrical bridge, thermals and power draw remain identical to a direct cable connection.

Plug-and-play simplicity with no software

Installation requires no drivers, firmware updates or configuration utilities. The bundled hardware consists solely of the adapter unit itself; there are no cables, brackets or mounting screws included. This keeps the bill of materials minimal and eliminates compatibility variables for immediate deployment in RAID array expansion or storage upgrade scenarios.

Erősségek

  • 90-degree angled design saves space in tight chassis
  • Converts SFF-8482 29-pin SAS to SATA 22-pin for broad compatibility
  • Ideal for RAID array expansion and server storage upgrades
  • Stable signal transmission supports high-speed SAS/SATA hard drive operation
  • Compact plug-and-play structure installs easily without extra drivers

Műszaki adatok

Ehhez a termékhez egyelőre nincs közzétett műszaki adat.

Kérdések a termékről

How do I install the 90-degree SFF-8482 29-pin SAS to SATA 22-pin adapter in a tight chassis?

Align the 29-pin SAS connector with the drive or backplane, then press the 22-pin SATA end straight into the motherboard or RAID controller port; the right-angle body keeps the cable run flat against the chassis wall so it clears adjacent cards.

What maintenance will the adapter need over time?

No scheduled maintenance is required; if a connection becomes intermittent, reseat both the 29-pin SAS and 22-pin SATA ends and inspect the gold contacts for dust or bent pins.

What limit appears first when the adapter runs under sustained heavy I/O?

The adapter itself is passive, so the first limit is the maximum throughput of the attached SATA 22-pin interface and the drive's own sustained transfer rate.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.