NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Solid Gear
A Micro PS3 ATX unit delivering 300 W with passive PFC, a 20+4 pin main connector, single +12 V rail, three SATA power connectors and over-voltage plus overload protection
The Solid Gear SDGR-MPS3-300 is a Micro PS3 form-factor power supply rated at 300 W. It fits compact chassis that accept the Micro PS3 standard and provides a single +12 V rail. The unit uses passive power-factor correction and a single cooling fan.
Builders assembling a low-power system in a Micro PS3 case will find the connector set adequate for a basic motherboard, CPU and a few drives. Systems that require higher wattage, multiple +12 V rails or modular cabling should consider a different power supply.
The +12 V output delivers up to 15 A, which determines how much power is available for the processor and graphics card. If the combined load of those components exceeds this current, the unit will not support the build.
| Brand | Solid Gear |
|---|---|
| Model | SDGR-MPS3-300 |
| Type | Micro PS3 |
| Maximum Power | 300 W |
| Fans | 1 |
| PFC | Passive |
| Main Connector | 20+4 Pin |
| +12V Rails | Single |
| SATA Power Connector | 3 |
| Modular | No |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 110 - 120 V / 220 - 240 V |
| Input Current | 10A @ 115V, 6A @ 230V |
| +3.3V Max. Current | 12A |
| +5V Max. Current | 14A |
| +12V1 Max. Current | 15A |
| +5VSB Max. Current | 2A |
| 12V Power Connector | 1 x 4 Pin ATX 12V |
| Floppy Connector | 1 |
| Peripheral Connector | 3 |
| Fans Total Quantity | 1 |
| Top Fans Size | 80mm |
| Over Load Protection | Yes |
| Short Circuit Protection | Yes |
| Under Voltage Protection | Yes |
| Over Current Protection | Yes |
| Over Power Protection | Yes |
| Over Temperature Protection | Yes |
The supply uses passive PFC and one fan, so it will draw up to 10 A at 115 V or 6 A at 230 V and exhaust heat through that single fan; expect typical office-level noise rather than silent operation.
It comes with a fixed 20+4 pin main connector, one 4-pin ATX 12 V CPU plug, three SATA power leads, three 4-pin Molex leads and one floppy lead; your motherboard and drives must accept those exact plugs.
The unit only provides a 4-pin ATX 12 V connector and Molex leads; it has no 6-pin PCIe plug, so an older card requiring that connector cannot be powered directly.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?