Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Team Group

Team Group CTCMD5192G6000HC32AOC01 server RAM 192GB 8x24GB DDR5 6000 CL32 ECC RDIMM 1.4V

SKU CH-R2Q0-YRQ1H MPN CTCMD5192G6000HC32AOC01

Eight 24 GB registered ECC DDR5 modules run at 6000 MT/s with CL32 timings and 1.4 V for stable workstation performance

  • Capacity192GB (8 x 24GB)
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL32
  • Timing32-39-39-84
  • Voltage1.40V

Capacity

  • 128GB (4 x 32GB)
  • 128GB (8 x 16GB)
  • 192GB (4 x 48GB)
  • 192GB (8 x 24GB)
  • 256GB (8 x 32GB)
  • 384GB (8 x 48GB)
  • 64GB (4 x 16GB)
  • 96GB (4 x 24GB)

Az áthúzott konfigurációk léteznek, de nem érhetők el itt.

Speed DDR5 6000 (PC5 48000)

  • 192 GB capacity across eight 24 GB modules for massive workloads
  • DDR5 6000 speed with CL32 latency for responsive server performance
  • ECC registered design corrects errors to protect data integrity
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking
  • Aluminium heat spreader delivers effective thermal dissipation

Server-grade capacity for workstations

This kit delivers 192GB across eight 24GB DDR5 RDIMMs rated at 6000 MT/s with CL32 timing and ECC. Registered buffering and on-die error correction target professional workloads that demand data integrity over raw latency. It is not suited for consumer platforms that cannot address registered modules or that lack the memory-controller lanes to populate eight slots.

Registered DDR5 limits and platform constraints

The modules run at 1.4V under Intel XMP 3.0 or AMD EXPO profiles and require a motherboard with a 288-pin DDR5 RDIMM topology. Supported chipsets are limited to AMD TRX50, WRX90, Intel W790 and W890; other chipsets will not initialise the registered buffers. Bandwidth scales to PC5-48000 only when the platform memory controller sustains the rated transfer rate.

Straightforward install with common pitfalls

Insert each module until the retention clips engage; the aluminium spreader adds negligible height for standard server heatsinks. Populate all eight slots identically — mixing capacities or ranks breaks training. Verify the BIOS is updated to the vendor revision that enables XMP 3.0 or EXPO for RDIMMs, otherwise the kit will fall back to JEDEC speeds.

Erősségek

  • 192 GB capacity across eight 24 GB modules for massive workloads
  • DDR5 6000 speed with CL32 latency for responsive server performance
  • ECC registered design corrects errors to protect data integrity
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking
  • Aluminium heat spreader delivers effective thermal dissipation

Műszaki adatok

BrandTeam
SeriesT-Create Master
ModelMASTER DDR5 WORKSTATION MEMORY BLACK
Part NumberCTCMD5192G6000HC32AOC01
Capacity192GB (8 x 24GB)
Type288-Pin DDR5 SDRAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL32
Timing32-39-39-84
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ChipsetAMD TRX50/WRX90
Intel W790/W890
Heat SpreaderAluminum
Szállítási súly0.66 kg
Csomagméret178 × 152 × 64 mm

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Should I choose the 8x24GB kit or a different capacity for my workstation?

This kit provides 192GB total across eight 24GB modules, filling eight DDR5 slots. Choose it when your board supports eight-channel Registered ECC memory and you need maximum capacity.

What does the DDR5 6000 speed with CL32 latency deliver in a real server build?

At 6000 MT/s with 32-39-39-84 timings and 1.4V, the modules run at their rated overclock profile via Intel XMP 3.0 or AMD EXPO, giving high bandwidth for compute-intensive workloads on supported platforms.

How does the 288-pin DDR5 RDIMM interface and registered design affect compatibility?

The 288-pin Registered DIMM format with ECC requires a workstation or server motherboard with a compatible chipset such as Intel W790, W890 or AMD TRX50, WRX90; it will not fit standard consumer DDR5 boards.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.