Timetec
Timetec Pinnacle Konduit 32GB Kit (4x8GB) DDR4 3200 Pink
Four 8 GB DDR4 modules at 3200 MHz with a pink aluminium heat spreader and CL16-18-18-38 timings
- Capacity32GB (4 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ColorPink
- 32 GB total capacity from four 8 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL16-18-18-38 timings at 1.35 V for stable operation
- XMP 2.0 profile enables one-click overclocking in BIOS
- Pink aluminum heat spreader aids cooling and adds visual style
32 GB pink DDR4 kit for desktop builders
This Timetec Pinnacle Konduit kit delivers 32 GB of DDR4 memory across four 8 GB modules coloured pink. It targets desktop builders who want a coordinated look and a straightforward capacity upgrade. The unbuffered non‑ECC design suits standard consumer motherboards.
CL16‑18‑18‑38 latency at 3200 MT/s
The modules run at DDR4 3200 (PC4‑25600) with timings of 16‑18‑18‑38 and a CAS latency of 16 cycles. XMP 2.0 support lets the firmware apply these settings with a single BIOS selection. Rated voltage is 1.35 V.
Four‑slot population on AMD or Intel platforms
All four 288‑pin DIMMs must be installed together to reach the rated 32 GB. The maker notes that some motherboards may reduce the maximum speed when every slot is filled. Aluminium heat spreaders cover each module. Builders who need more than 32 GB or prefer a different colour should look elsewhere.
Erősségek
- 32 GB total capacity from four 8 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL16-18-18-38 timings at 1.35 V for stable operation
- XMP 2.0 profile enables one-click overclocking in BIOS
- Pink aluminum heat spreader aids cooling and adds visual style
Műszaki adatok
| Capacity | 32GB (4 x 8GB) |
|---|---|
| Speed | DDR4 3200 (PC4 25600) |
| Color | Pink |
Kérdések a termékről
What does the CL16-18-18-38 timing mean when the kit is running at 3200MHz in my system?
The kit runs at CAS latency 16 with supporting timings of 18-18-38 and a command rate of 56, delivering responsive performance at the rated 3200MHz speed when XMP is enabled.
How does the XMP 2.0 profile work with the DDR4 interface on my motherboard?
XMP 2.0 stores the 3200MHz, CL16-18-18-38, 1.35V profile on the module; enabling it in the BIOS applies those settings automatically without manual tuning.
Will the pink aluminium heat spreaders on these four 8GB modules fit under a large CPU cooler?
Each module uses a standard-height aluminium heat spreader on a 288-pin DDR4 PCB; measure your cooler clearance against typical DDR4 module height to confirm fit.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.



